System Settings And History; Visual Inspection; System Log Book; Operating Data For Controller -N1 - Dimplex LA 60P-TUR Maintenance Instruction

Maintenance instructions LA 60P-TUR
1

System settings and history

1.1 Visual inspection

Check the casing and façade for visible damage.

1.2 System log book

Check the last entry in the log book.
Record the maintenance work.
1.3 Operating data for controller -
N1
The following values must be read out from controller -N1 and
logged in the maintenance record. See the separate "Heat
pump manager" instructions in this regard.
 Compressor group 1 runtime,
compressor group 2 runtime,

 2nd heat generator runtime,
fan runtime,

 heating pump runtime,
alarm memory no. 2,

alarm memory no. 1,

 set value for heating,
set value for cooling,

 software version.
www.glendimplex.de
2
It is essential to adhere to the following steps before starting
the maintenance work
CAUTION!
1. Before starting the repair work, ensure
that the power supply to the device has
been disconnected externally. Caution:
multiple electric circuits (supply voltage/
control voltage).
CAUTION!
2. It is prohibited to remain in the direct
vicinity of the device during storms (risk of
lightning)!
CAUTION!
3. Work outdoors on electrical equipment or
live components may only be carried out in
dry weather conditions. In the event of
precipitation (rain, snow, etc.), all such work
must be stopped.
CAUTION!
4. The refrigeration circuit must not be
damaged.
CAUTION!
5. The
refrigerant. Avoid ignition sources in the
danger area!
CAUTION!
6. Before opening the device, check the
work environment with a suitable gas
detector.
switched on in the device during all
subsequent work.
Position the gas detector directly in the work area. The gas de-
tector's threshold for triggering the alarm must be 20 % LEL
(Lower Explosive Limit).
452167.66.43-EN · FD 0008

Mandatory steps

device contains
Position the
English
combustible
gas detector
EN-5