ELEEELS P1 Instruction Manual

P1
Instruction Manual
We have developed the ELEEELS percussive massager to accelerate recovery,
prevents muscle damage, relieves pain, promotes circulation, and everyday
relaxation anytime, anywhere.

P1 at a Glance

1
4
5
Vibration Frequency:
Level 1 (20 strokes per second) / Level 2 (30 strokes per second)
Level 3 (40 strokes per second) / Level 4 (50 strokes per second)
Speci cations
- Rated Voltage: 7.4V
- Rated Power: 15.16W
- Input: USB-C 5V/2A
- Battery Capacity: 1000 mAh
- Charging Port: USB-C
- Weight: 277 grams
- Operating Time: around 2.5 hours of use per charge under maximum speed

INSTRUCTIONS

PLEASE READ PRIOR TO USE

CHARGING

1) Flip over the charging port cover gently to unveil the USB-C charging
port. Connect USB-C cable to the charging port.
2) The charging speed depends on what adapter is used. It is suggested
to use an USB adapter supporting 5V/2A to fully charge in
approximately 2.5 hours.
3) During charging, the battery level indicator ashes in green slowly.
When the device is fully charged, the battery level indicator turns o .

OPERATING

• First, press the power button for 1.5 seconds to switch on to level 1.
• Then, press the speed control button repeatedly to select the required
speed level. The speed indicator shows the speed level:
- Level 1: Pink / Level 2: Purple / Level 3: Blue / Level 4: White
• Massage the desired body part at the desired speed by applying
pressure as needed.
• Press the power button for 1.5 seconds to switch o .
• When the massage gun stops operation after a 10-minute session,
simply press the power button to start a new one.
• When the battery level is lower than 10%, the battery level indicator
ashes in red. Operation stops. Please recharge the battery.

THERMAL PERCUSSIVE MASSAGE - TUTORIAL

Press the power button for 1.5 seconds to switch on. Heat is generated
directly from P1's high-speed operation. After 5 minutes of operation
(assume working at room temperature), the prime CNC aluminium alloy
applicator warms up to around 37°C - 45°C automatically without extra
battery or heating plate. CNC aluminum alloy, an ideal conductor, helps
to transfer the heat from P1 to the massage area.
The warmup speed of the applicator depends on the speed level. Higher
speed level generates more heat energy, which will lead to higher
temperatures of the applicator. Enjoy thermal percussive massage by
massaging the desired body part.
Piculet
Percussive
Massager
2
3
1) Speed / battery level indicator
2) Power / speed control button
3) USB-C charging port cover
4) Prime CNC aluminium alloy
applicator
5) USB-C cable
6) 4 add-on silicon rubber
attachments
6