Remote Power: Istruct The Tosh To Accept/Ignore The Ir Remote On/Off Command; Ble Control: Enabling/Disabling The Bluetooth; Le Receiver; Set Startup Item: Decide Which Menu Item To See First At Each Access - M2TECH TOSH User Manual

TOSH
BALANCED LINE PREAMPLIFIER
REVISION P A – JUNE 2023
R
7.2.10. REMOTE POWER: instruct the TOSH to accept/ignore the IR remote
ON/OFF command
When the TOSH is used in conjunction with the VAN DER GRAAF MKII and the power mode is
set to "enable", it may be desirable to inhibit the on/off command from the infrared remote
control, as the VAN DER GRAAF MKII will receive and execute the on command instead /off
from the remote control.
This way, pressing the on/off button on the remote will instruct the VAN DER GRAAF MKII to
enable/disable its outputs to turn on/off the TOSH and other connected M2Tech units in the
programmed order. Please read the VAN DER GRAAF MKII user manual for details.
7.2.11. BLE CONTROL:
The user can choose to enable or disable the Bluetooth® Low Energy interface. This can
be done by accessing this menu function.
7.2.12. SET STARTUP ITEM: decide which menu item to see first at each
access
The user can decide to start from the first item of the TOSH menu at each access or from
the last one used at the previous access.
SET STARTUP ITEM
REMOTE POWER
REMOTE POWER
ENABLE
enabling/disabling the Bluetooth® LE receiver
BLE CONTROL
BLE CONTROL
ENABLE
SET STARTUP ITEM
FIRST
SETUP
REMOTE POWER
DISABLE
SETUP
BLE CONTROL
DISABLE
SETUP
SET STARTUP ITEM
LAST
22
M2Tech
www.m2tech.biz
Copyright © 2023, M2Tech Srl