Preparing For Installation; Safety Precautions; General Safety Precautions; Handling Safety - Ruijie RG-AP180P-L Hardware Installation And Reference Manual

Hardware Installation and Reference Guide
2

Preparing for Installation

2.1

Safety Precautions

Note
To avoid personal injury and device damage, carefully read the safety precautions before you install the
device.
The following safety precautions may not cover all possible dangers.
2.1.1

General Safety Precautions


Do not expose the AP to high temperature, dusts, or harmful gases. Do not install the AP in an inflammable
or explosive environment. Keep the AP away from EMI sources such as large radar stations, radio stations,
and substations. Do not subject the AP to unstable voltage, vibration, and noises.

The installation site should be free from water flooding, seepage, dripping, or condensation. The installation
site should be selected according to network planning, communications equipment features, and
considerations such as climate, hydrology, geology, earthquake, electrical power, and transportation.

The installation site should be dry. It is not recommended that the AP be installed in a place near the sea.
Keep the device at least 500 meters away from the ocean and do not face it towards the sea breeze.

Do not place the device in walking areas.

During the installation and maintenance, do not wear loose clothes, ornaments, or any other things that may
be hooked by the chassis.

Keep tools and components away from walking areas.
2.1.2

Handling Safety


Prevent the AP from being frequently handled.

Cut off all the power supplies and unplug all power cords before moving or handling the device.
2.1.3

Electric Safety

Warning
Improper or incorrect electric operations may cause a fire, electric shock, and other accidents, and lead to
severe and fatal personal injury and device damage.
Direct or indirect contact with high voltage or mains power supply via wet objects may cause fatal dangers.

Observe local regulations and specifications during electric operations. Only personnel with relevant
qualifications can perform such operations.

Check whether there are potential risks in the work area. For example, check whether the ground is wet.

Find the position of the indoor emergency power switch before installation. Cut off the power switch in case
10
Preparing for Installation