Operating The Unit - Boss Super Octave OC-3 Owner's Manual

Operating the Unit

fig.05
5 4
1. Turn the effect on.
When you have made the necessary con-
nections (p. 8), depress the pedal switch to
turn the effect on. (the CHECK indicator
turns red.)
2. Select the mode with the MODE knob.
10
3 2
3. Use the CONTROL knob to adjust the
range, the -2 octave level, or the drive
effect.
* The function varies according to the mode selected
in Step 2. Refer to "9. CONTROL Knob" in "Panel
Descriptions" (p. 7).
* Note that no octave sound is produced if the
DIRECT LEVEL knob or OCT1 LEVEL knob is set
to MIN while the MODE knob is set to "DRIVE."
* Note that little or no octave sound is output if the
OCT1 LEVEL knob or CONTROL knob is set to
MIN while the MODE knob is set to "POLY."
4. Use the OCT1 LEVEL knob to adjust the
volume of the sound one octave down.
5. Adjust the direct sound volume level with
the DIRECT LEVEL knob.
* When the MODE knob is set to "DRIVE," the
DIRECT LEVEL knob adjusts the total volume
level.