Table of Contents
Advertisement
1600
5200
TSGI7E - Syncing your Remote
The wireless set button is a feature that allows you to
sync remotes to your generator. You are able to set up to
two remotes to the TSGI7E or reset a remote control with
the generator.
To sync or reset remote controls, do the following:
1.
Turn the ignition switch on the generator to the
"ON" position.
2.
Turn the battery switch to the "ON" position.
3.
Push and hold the wireless set button next to
the red light (located on the front panel) for
approximately three seconds - the red light will turn on.
4.
Push and release the "STOP" button on the
remote and the red light will blink once to remove the
remote program.
5.
Push and release the "START" button and the
red light will blink once to program the remote.
6.
Press and hold the programming button for
approximately three seconds until the red light turns off.
You can now test the remote Start & Stop features.
TSGI7E - Connecting The Battery
1. Remove the protective cover from the red battery
lead.
2. Attach the red lead to the red terminal on the
battery with the cap screw and secure with the lock
washer.
3. Repeat step 2 for the black battery lead.
1600
5200
Advertisement
Table of Contents
