Bypass Mode - Roku HD1000 User Manual

Bypass Mode

When you press the power button on your Roku HD1000, it will enter
Standby mode and display a pass-through video signal on its video
outputs. The pass-through video signal will be the same video signal
that is connected to the Roku HD1000's video input connectors.
If you select the "Auto ON" option on the No Video selector, and
then place your Roku HD1000 in Standby mode (by pressing the
power button), it will automatically switch between the pass-
through video signal and its own video display whenever the input
video signal is turned on or off. For example, if you connect your
DVD player to the video input connectors, whenever you turn your
DVD player on, the Roku HD1000 will automatically switch to pass-
through video and display the DVD player's output. When you turn
the DVD player off (and remove the input video signal), the Roku
HD1000 will automatically switch back to its own video display.
Also, when you have the No Video selection set to "Auto ON," press-
ing the power button will take you in and out of an override mode,
in which the Roku HD1000 remains displaying its own video signal,
whether or not there is a video signal present on its inputs.
28
Wireless
If you have a supported wireless adapter, you can connect your
Roku HD1000 to a wireless network. First, make sure the wireless
receiver is properly connected to the Roku HD1000's USB port.
See www.rokulabs.com/support/HD1000WiFi for a list of support-
ed devices.
To complete the connection, you must enter the wireless network's
name (ESSID) and password (if any) in the Wireless setup panel. You
only need to enter this information once. The Roku HD1000 will
automatically reconnect to the network if it ever loses power.
The ESSID is the name of the wireless network. Enter the name by
pressing Select on the ESSID button, and then entering the name
in the on-screen keyboard to the right. Remember that ESSIDs are
case-sensitive, so use the on-screen Shift button to switch between
capital and lowercase letters.
The Password field is only necessary on wireless networks
configured to have a password. Enter a password with the on-
screen keyboard.
Press the Done button to use these settings to connect to the
wireless network.
Sample Content
Sample content is stored on your Roku HD1000's internal memory.
Select the Built-in media source at the top left side of your screen
and get to know your new product. If you scroll down to Roku
Applications and select Roku Art, the images and audio will play
together as a musical slideshow.