Operation - Krüger & Matz KM0563 Owner's Manual

DESCRIPTION
1 2 3
USB
AUX
DC 5V
1. USB-C charging port
2. AUX 3,5 mm input
3. USB port
4. Volume up / down / change track buttons
5. Microphone
6. Play / pause button
7. Mode button
8. Power button

OPERATION

Turning on / off / volume adjustment
To turn on the speaker, press and hold power button for about
2 seconds. To turn off the speaker, repeat this action. To
increase or decrease the volume keep pressing volume up/
EN EN
down button until the desired value is reached.
Illumination settings
The speaker illumination turns on automatically when you turn
on the device. To change light effects or turn them off press
and hold play / pause button.
10 10
Owner's manual Owner's manual
4 5 6 7 8
M
Owner's manual Owner's manual
Playing via Bluetooth
The speaker will automatically go to Bluetooth mode, after
turning it on. On the external device, search for Bluetooth
devices and connect to the speaker (KM Street). Played music
can be controlled on the external device or with the buttons on
the speaker. Press and hold the volume up button to change
the track. To play the previous track, press and hold the volume
down button.
Playing via USB
After plugging the USB drive, the speaker will automatically go
to USB mode. To control played music, use buttons on the
speaker. Press and hold the volume up button to change the
track. To play the previous track, press and hold the volume
down button.
Playing via AUX
When connected to the AUX jack, the speaker will automatically
enter AUX playback mode. Use your source device to control
the music that is playing.
TWS function
TWS function allows for playing from one source on two
speakers. After turning on the speakers, press and hold mode
button on the one of them. Correct pairing will be signaled by
the voice prompt. After connecting the external device, the
sound will be played on both speakers. To turn of TWS mode,
press and hold mode button again.
Hands-free features
To answer a phone call on the loudspeaker, press the play /
pause button. During a call, press and hold the play/pause
button for about 2 seconds to switch the call to the phone.
EN EN
11 11