System Optimization - REVELL Ultima Gem User Manual

Figure 15. The REVEL
ULTIMA GEM level control
locations and initial settings.

SYSTEM OPTIMIZATION

After connecting the REVEL ULTIMA GEM loudspeakers,
initially set both HIGH FREQUENCY LEVEL controls on the
rear panel to the "0" position (see Figure 15).
1. Turn on the system power and play a favorite piece of music.
Slowly increase the volume to a comfortable level and listen
from your main listening position. Experiment with placement
(see page 9), as it will pay off in optimized tonal balance, image
specificity, and spaciousness.
2. You may also wish to further adjust the HIGH FREQUENCY
LEVEL controls (see Figure 15) for both front and rear tweet-
ers to achieve the most natural sound in your room. Varying
the FRONT control will change the high frequency balance
and timbre. Varying the REAR control will mainly affect "air"
and spaciousness.
NOTE: Be certain the corresponding controls are set the same on
both left and right channels.
GEM Rear
High Frequency Level
(dB)
-2
-1 +1
-.5 0 +.5 0ff 0 +4
Front Rear
High Frequency
Input
Note:
Remove
Straps for
Bi-wired or
Bi-amplified
Operation.
Low Frequency
Input
Serial No.
Northridge
California
Made in U.S.A.
Connector Panel
High Frequency Level
(dB)
-2
-1 +1
0 +4
-.5 0 +.5 0ff
Front Rear
High Frequency
Input
Note:
Remove
Straps for
Bi-wired or
Bi-amplified
Operation.
Low Frequency
Input
Serial No.
Northridge
California
Made in U.S.A.
REVEL ULTIMA GEM
Owner's Manual
Set High-Frequency
Level Controls
To "0"
17