This Guide; Important Note - Raymarine SmartPilot S1000 Installation Manual

2

This guide

Before starting to install your S1000 Autopilot, please take time to read this guide. In particu-
lar, please take note of the safety and electromagnetic compatibility (EMC) information at the
end of this guide.
WARNING:
This product must be installed and operated in accordance with the
Raymarine instructions provided. Failure to observe this could
result in personal injury, damage to the boat and/or poor product
performance.
The installation procedures are described in a rational sequence, but because of variations in
boat design, space available etc, you may need to adapt the sequence to suit your particular
circumstances.
Before you start fitting your S1000 Autopilot, we recommend you:
• Unpack your S1000 Autopilot and check that all parts are present.
• Plan your S1000 Autopilot installation so that you fit the components in the best possible
locations.

Important note

The S1000 Autopilot must receive position information from a suitable GPS in
order to function correctly. GPS systems compatible with SeaTalk or NMEA or
both, are suitable. If you need advice as to which GPS to use, please contact
your Raymarine dealer.
S1000 Autopilot Installation Guide