Raymarine SmartPilot S1000 Installation Manual page 12

Raymarine s1000 autopilot system: installation guide
Hide thumbs Also See for SmartPilot S1000:
Table of Contents

Advertisement

10
0
Connecting the autopilot pump, sheet 2
Connecting the autopilot pump, sheet 2
3.
3.
Set steering to dead ahead
Set steering to dead ahead
and do not move it until
and do not move it until
instructed.
instructed.
5.
5.
Remove & retain the plug from the
Remove & retain the plug from the
helm pump lower connector, and
helm pump lower connector, and
drain the fluid into one of the cups
drain the fluid into one of the cups
provided. Discard the drained fluid in
provided. Discard the drained fluid in
accordance with local regulations.
accordance with local regulations.
7.
7.
Using the
Using the
Installing tapered thread fittings
Installing tapered thread fittings
procedure, fit 'T' connectors to the helm pump
procedure, fit 'T' connectors to the helm pump
port and starboard connectors, and a straight
port and starboard connectors, and a straight
connector to the helm pump lower connector.
connector to the helm pump lower connector.
S1000 Autopilot Installation Guide
4.
4.
Remove & retain the helm pump
Remove & retain the helm pump
breather cap.
breather cap.
6.
6.
Label the port ram hose to aid future
Label the port ram hose to aid future
reassembly, then disconnect both ram
reassembly, then disconnect both ram
hoses & straight connectors from the
hoses & straight connectors from the
helm pump.
helm pump.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents