16 . DSC 6000 Installation and Hardware Guide
Electrical Safety
This analyzer conforms to IEC publication 61010-1 ("Safety requirements for electrical
equipment for measurement, control and laboratory use") as it applies to IEC Class 1
(earthed) appliances, and therefore meets the requirements of the Low Voltage Directive
2006/95/EC.
Pollution Degree 2
This product will operate safely in environments that contain nonconductive foreign matter
up to Pollution Degree 2 in EN/IEC 61010-1.
Normally only non-conductive POLLUTION occurs. Occasionally, however, a temporary
conductivity caused by condensation must be expected.