Table of Contents
Advertisement
9. I FEEL button
Press this button to start I FEEL function and "
will send the detected ambient temperature to the controller and the unit will automatically adjust the indoor temperature according to the
detected temperature. Press this button again to close I FEEL function and "
● Please put the remote controller near user when this function is set. Do not put the remote controller near the object of high temperature
or low temperature in order to avoid detecting inaccurate ambient temperature.
10. TIMER ON / TIMER OFF button
● TIMER ON button
"TIMER ON" button can set the time for timer on. After pressing this button, "
blinks. Press " ▲ " or "
or decrease 1min. Hold " ▲ " or "
confirm it. The word "ON" will stop blinking. "
up, press "TIMER ON" button to cancel it.
● TIMER OFF button
"TIMER OFF" button can set the time for timer off. After pressing this button,"
blinks. Press " ▲ " or "
or decrease 1min. Hold " ▲ " or "
word "OFF" will stop blinking. "
"TIMER OFF" button to cancel it.
Note:
● Under on and off status, you can set TIMER OFF or TIMER ON simultaneously.
● Before setting TIMER ON or TIMER OFF, please adjust the clock time.
● After starting up TIMER ON or TIMER OFF, set the constant circulating valid. After that, air conditioner will be turned on or turned off
according to setting time. ON/OFF button has no effect on setting. If you dont need this function, please use remote controller to cancel it.
11. CLOCK button
Press this button to set clock time. "
pressing of " ▲ " or "
Release this button when reaching your required time. Press "CLOCK" button to confirm the time. "
Note:
● Clock time adopts 24-hour mode.
● The interval between two operation cant exceeds 5s. Otherwise, remote controller will quit setting status. Operation for TIMER ON/TIMER
OFF is the same.
12. QUIET button
Press this button, the Quiet status is under the Auto Quiet mode (display "
and Quiet OFF (there is no signal of "
Note:
● The Quiet function cannot be set up in Fan and Dry mode; Under the Quiet mode, the fan speed is not available.
● When quiet function is selected:
Under cooling mode: indoor fan operates at notch 4 speed. 10 minutes later or when indoor ambient temperature≤28 ℃ , indoor fan will
operate at notch 2 speed or quiet mode according to the comparison between indoor ambinet temperature and set temperature.
Under heating mode: indoor fan operates at notch 3 speed or quiet mode according to the comparison between indoor ambient temperature
and set temperature.
actual cooling, heating or fan mode.
Under dry, fan mode: indoor fan operates at quiet mode. Under auto mode: the indoor fan operates at the auto quiet mode according to
actual cooling, heating or fan mode.
● The Quiet function is only available for some models.
13. WiFi button
Press " WiFi " button to turn on or turn off WiFi function. When WiFi function is turned on, the " WiFi " icon will be displayed on remote
controller; Under status of unit off, press "MODE" and " WiFi " buttons simultaneously for 1s, WiFi module will restore to factory default
setting.
● This function is only available for some models.
32
" will be displayed on the remote controller. After this function is set, the remote controller
"button to adjust TIMER ON setting. After each pressing " ▲ " or "
" button, 2s later, the time will change quickly until reaching your required time. Press "TIMER ON" to
" icon resumes displaying. Cancel TIMER ON: Under the condition that TIMER ON is started
" button to adjust TIMER OFF setting. After each pressing " ▲ " or "
" button, 2s later, the time will change quickly until reaching your required time. Press "TIMER OFF"
" icon resumes displaying. Cancel TIMER OFF. Under the condition that TIMER OFF is started up, press
" icon on remote controller will blink. Press " ▲ " or "
" button, clock time will increase or decrease 1 minute. If hold " ▲ " or "
" displayed), after powered on, the Quiet OFF is defaulted.
" will disappear.
" icon disappears and the word "ON" on remote controller
" button, TIMER ON setting will increase
"icon disappears and the word "OFF" on remote controller
" button, TIMER OFF setting will increase
" button within 5s to set clock time. Each
" button, 2s later, time will change quickly.
" icon stops blinking.
" and "AUTO" signal ) and Quiet mode (display "
Service Manual
" singal)
Technical Information
Advertisement
Table of Contents
