Randell 9560-1 Specifications

Drop-In Hot Food Well
model
9560-1
9560-2N
Description:
Stainless steel drop-in, electrically heated hot food well unit
with individually and thermostatically controlled wells. Separate
control panel for field installation, prewired.
Specifications:
UNIT TOP: Top to be one piece 18 gauge stainless steel. Top
openings to be die-stamped with raised perimeter rims.
FOOD WELLS: Units fitted with compliment of 12" x 20" x 6 1/2"
deep, electrically heated, sealed food wells, individually and
thermostatically controlled. Unit prewired to controls, mounted
on separate stainless steel panel. Note: If optional drains &
manifold are ordered, common gate is provided installed.
UNIT BODY: Fully insulated exterior body of corrosion resistant
steel.
CONTROLS: Controls prewired to junction box mounted on
separate stainless steel panel for field installation in counter
front. Connections to heating elements to be located outside of
heated zone to avoid wiring deterioration. 208/240V operation.
(120V available on request).
Standard Features:
• Individually controlled wells for maximum
operator control
• True thermostatic control for precise food temperatures
• Drains available as option for wet operation
• Approved for installation in either stainless or laminate
counter work
• Units listed under N.S.F. standard 4
• UL approved
Options & Accessories:
Adaptor bars
Extended thermostatic lead
models 9560 & 9560N
9560-2 9560-3
9560-3N
1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, fax 888-266-5244
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
9560-4 9560-4
model 9560-4 shown
model 9560-2N shown
9560-6
Randell Drop-In, Page 5
Revised 07/05