— Turns power on or off from STANDBY mode.
CD — Selects CD player and change CD display information in CD
TUNER — Selects radio tuner and change radio band in Tuner mode.
TAPE — Selects tape player.
AUX — Selects Aux; turns the system on.
EQ — Selects equalizer presets.
B BOOST—Turns Bass Boost on or off.
DIMMER•DEMO / CD INFO —Turns the feature demonstration on or off;
adjusts display brightness; selects among displaying disc details.
VOL+ or VOL- — Increases/ decreases volume.
In Tuner mode - Tunes up radio frequency.
In Tuner mode - Tunes down radio frequency.
OPEN/CLOSE — Opens and closes CD disc tray.
STOP — Stops playing CD.
REPEAT — Repeats a track, CD, or all CDs.
- mutes sound.
— Turns on/off random playback.
FM ST. - Toggles between FM stereo and mono.
DISC SKIP — Skips to next CD.
INTRO - Turns INTRO mode on or off to play the first 10 seconds of each
PRESET UP/DN — Selects next/ previous preset station.
SLEEP - selects the time interval in minutes before the unit turns off.
The remote control must be inserted with 2 "AAA" or "R3" or "UM 4"
batteries prior to use. Follow the steps below to ensure correct installation.
1. Open the battery compartment door (located at the back of the remote
control) by sliding the cover out.
2. Before inserting the batteries, observe the polarities (that is, + and -) of
the battery then relate the polarities to the engraved diagram inside the
battery compartment. Now insert the batteries.
3. After installation of the batteries, place the lit to cover the batteries.
Lightly push it closed with a snap.
— Plays and pauses current CD.
— In CD mode - Skips forward to the next CD track;
— In CD mode - Skips backwards to the previous CD
Cassette functions can not be operat-
ed from the remote control.