Troubleshooting Tips; More Information; Cleaning; Cd Player - RCA RS1282 User Manual

Rca rs1282 stereo systems: user guide
Table of Contents

Advertisement

1282 IB US ENG
4/24/00

Troubleshooting Tips

EN
Problem
System will
not turn on
No sound
Poor radio
reception
CD does
not play
CD sound
skips

More Information

Disconnect the audio system from the power source
before performing any maintenance.

Cleaning

Clean the exterior of the system using a soft dust
cloth.

CD Player

CAUTION! This system operates with a laser. It must
be opened by only a qualified technician.
Handling CDs
• Do not touch the signal surfaces. Hold CDs by the
edges, or by one edge and the hole. Do not affix labels
12
3:47 PM
Page 16
Solution
Check power cord for a secure connection.
Unplug the unit for a moment, and then
plug into power source again.
Check the outlet by plugging in another
device.
Increase the volume setting.
Check connection to speakers.
Check that you have selected the appropri-
ate function: CD, Tuner, AUX.
Check antenna connection.
Move antenna.
Turn off nearby electrical appliances, such
as hair dryer, vacuum cleaner, microwave,
fluorescent lights.
Check that CD is in the tray.
Check that CD label is facing up.
Check that PAUSE mode is not on.
Check that CD function is selected.
Use a CD lens cleaner.
Clean the disc.
Check disc for warping, scratches, or other
damage.
Check if something is causing the system to
vibrate. If so, move the system.
Problem
Solution
CD button
Switch to another function (e.g. Tuner) and
will not
then back to CD.
respond, or
does not
change
discs when
you press
DISC SKIP
Remote
Check that the batteries are properly
control
installed.
does not
Replace weak batteries.
work
Check the system is plugged in to power
source.
Point the remote directly at the system's
front panel.
Move closer to the system.
Remove any obstacles between the remote
and the system.
or adhesive tapes to the label surfaces. Do not scratch or
damage the label. CDs rotate at high speeds inside the
player. Do not use damaged (cracked or warped) CDs
Cleaning CDs
• Dirty CDs can cause poor sound quality. Always keep
CDs clean by wiping them gently with a soft cloth from
the inner edge toward the outer perimeter.
• If a CD becomes dirty, wet a soft cloth in water, wring
it out well, wipe the dirt away gently, and then remove
any water drops with a dry cloth.
• Do not use record cleaning sprays or antistatic agents
on CDs. Also, never clean CDs with benzene, thinner, or
other volatile solvents which may cause damage to disc
surface

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Am1500

Table of Contents