Programming For Tv - RCA WKB10WB1 User Manual

WKB10WB1_1100QXD.job

Programming For TV

You will need to program the wireless keyboard to work with your
TV. Most RCA, GE & ProScan TVs will not require programming.
Check to see if your TV responds to the keyboard before you begin
programming. Use the following steps to program the
keyboard.
1 Manually turn on the TV
2 Find the 3-digit code for your TV from the Programmable Codes
listed on the next page. If more than one code is listed for your
brand of TV, use the one at the beginning of the list.
3 Press and HOLD the TV key
4 Enter the 3-digit code corresponding
to a particular TV brand
5 Release the TV key
6 Check to see if the code works. Aim the
keyboard at your TV and press the
ON•OFF key. If the TV responds, try
the CH +/- buttons.
Note: Your TV must have infrared (IR) remote control
receiving capability in order to be used with the
wireless keyboard.
8
11/7/00 2:14 PM Page 8
OR