Radio - RCA RCD122 User Manual

Radio

Tuning to a station
EN
1. Press Standby / On button to turn on power.
2. Press RADIO / band to select between AM
and FM band.
3. Press track / tune
station.
Tips Tips: Tips
Tips Tips
Press and hold track / tune track / tune track / tune track / tune track / tune
more than 1 second to automatically tune to
the next station.
4. Press DIGITAL VOLUME + / - to adjust a your
desired listening level
Tips: Tips Tips Tips Tips
Extend or reposition the antenna for better
FM reception. Move the unit for better AM
reception.
Setting presets manually
1. Press RADIO / band to select between AM/
FM.
2. Press track / tune
desired frequency.
3. Press set.
4. Press repeat / preset up repeatedly to
assign program number.
5. Press set to confirm.
6. Repeat steps 2 to 5 to preset to a maximum
of 10 channels for FM & AM band.
5
RCD122 EN
or to select radio
or for
or to access the
7
Auto preset
Press and hold RADIO / band to set presets
automatically. The display will show AUTO.
Once a station is found, the search stops briefly
to allow you to listen to the station.
• Press track / tune or
you decide not to store selected station.
• If you decide to store the station in preset
memory, wait a few seconds and the search
will resume.
Using presets
1. Press RADIO / band to select between bands.
2. Press repeat / preset up to enter preset
mode and PRESET 1 shows.
3. Press repeat / preset up repeatedly to access
your desired preset stations.
8/19/02, 9:44 AM
at this time if