Internal/External Memory Setting - RCA RP5016 User Manual

Internal/External memory setting

You can store the recorded messages in
either the built-in (INT) or external
(EXT) memory. To select, follow the
procedures as follow:
1. Turn on the unit.
2. Press MENU repeatedly to enter
memory location setting mode.
3. Default setting is INT,
press REVERSE or
FORWARD to select
between built-in and
external memory.
4. If external memory is selected., the
icon will show on display.
5. If the unit detects no external
memory card inserted after selecting
the external memory, the EXT icon
will keep flashing. Switch back to the
internal memory or insert external
memory card.
CAUTION: Before removing the
memory card from the device, follow
the procedures shown as below to
avoid any date loss.
1. Turn on the unit.
2. Press MENU to enter memory
location setting mode.
3. Press REVERSE or FORWARD to
select built-in memory.
4. Turn off the unit, then remove the
external memory card.
INT
EN
8