Recording Quality/ Condition; Other Functions; Introscan; Play One/Play All - RCA RP5020 User Manual

Recording quality / condition
Setting Recording
EN
Quality
You can select between two recording
qualities. Default is SP.
Definition
• SP (Standard Play) -
Model RP5020 allows about 760 mins
recording while model RP5025 allows
about 1520 mins recording.
• HQ (High Quality) -
Model RP5020 allows about 530 mins
recording while model RP5025 allows
about 1060 mins recording.
1. Press MENU button
three times, (SP or HQ
show on display.)
2. Toggle between SP
SP
and HQ by pressing
REVERSE or
FORWARD.
3. Confirm selection by
pressing MENU or
HQ
STOP button.
10
Setting Recording
Condition
You can select between two recording
conditions. Default is DICT.
Definition
• CONF (Conference) - in a more open
area and recording source is far from
the unit.
• DICT (Dictation) - in a more enclosed
area and recording source is close to
the unit.
1. Press MENU two
times until DICT or
CONF show on display.
2. Select recording DICT
condition by pressing
REVERSE or FORWARD.
3. Confirm selection by
pressing MENU button.
(You may press STOP to
CONF
exit from further
selection.)
Tip: Tip: Tip: Tip: Tip:
For conferences, to obtain
optimum recording quality, place
the recorder with the microphone
freely exposed to the sound source as close
as convenient. A built-in automatic recording
level control will set the optimum record
level during manual recording. Avoid
recording near unwanted noise sources, such
as air conditioners or fans.

Other functions

IntroScan

This feature allows playback of the
beginning 3 seconds of each file in a
folder.
1. Select folder (A/B/C/
A
MM DD
D)and file.
AM
2. Press REVERSE or
DICT
ONE
FORWARD until ALL
SP
shows on display
3. Press PLAY to start
A
introductory playback,
MM DD
INTRO shows on
display. ONE
SP
4. Press PLAY to start
playing desired file.
5. Press STOP to exit Intro Scan sooner.
Play one / play all
You can choose to play a specific file or
all files in a folder.
1. In STOP mode, press MENU button
repeatedly until ONE appears on display.
2. Press REVERSE or FORWARD to
toggle between ONE and ALL.
11
EN