Other Information - RCA L37WD14 User Manual

Scenium series hdtv/dvd monitor
Hide thumbs Also See for L37WD14:
Table of Contents

Advertisement

The menu is displayed in a foreign language
The Menu Language preference is set to that language. From the DVD's main menu, select the Languages option (In Spanish, shown as Idiomas; in French,
as Langues). From the Languages menu, select the Player Menus option (In Spanish, shown as Menús del Lector; in French, as Menus Lecteur). Highlight
the language you prefer and press OK.
No forward or reverse scan
Some discs have sections that prohibit rapid scanning, or title and chapter skip.
If you're trying to skip through the warning information and credits at the beginning of a movie, you won't be able to. This part of the movie is often
programmed to prohibit skipping through it.
Camera angle cannot be changed
Some discs don't have the multi-camera angle system, and some discs only have it in certain parts of the movie.
Picture is too tall and thin
Change the aspect ratio using the TV Image setting in the Display menu (see Chapter 5).
Picture is too short and wide
Change the aspect ratio using the TV Image setting in the Display menu (see Chapter 5).
Cannot copy discs to video tape
You can't record DVD discs onto videocassettes because the discs are encoded with anti-copy protection.
Full Version of Disc Does Not Play
The DVD might be locked. To unlock see Chapter 5.
Disc won't eject
When you put a disc into the disc tray, it may take up to 15 seconds to read the disc. You won't be able to eject the disc during this time. Wait 15 seconds
and try again.
I don't remember my password and I want to unlock the DVD
If you forget your password, simultaneously press and hold OPEN/CLOSE and STOP on the TV/DVD's front panel for 3 seconds. Enter a new password via the
Lock menu.
TV Problems
TV won't turn on
Press the TV button.
Make sure the TV is plugged in.
Check the wall receptacle (or extension cord) to make sure it is "live" by plugging in something else.
Something might be wrong with your remote control. Press the POWER button on the front of the TV. If the TV turns on, check the remote control
solutions on page 43.
The front panel controls may be locked (disabled). Use the remote control to unlock the front panel controls by selecting the Front Panel Block in the
Parental Control menu and press OK to uncheck the box.
Buttons don't work
If you're using the remote control, press the TV button first to make sure the remote is in TV mode.
The front panel controls may be locked (disabled). Use the remote control to unlock the front panel controls by selecting the Front Panel Block in the
Parental Control menu and press OK to uncheck the box.
Unplug the TV for two minutes and then plug it back in. Turn the TV on and try again.
TV turns off while playing
Sleep timer may have been activated. Go to page 34 for instructions.
Electronic protection circuit may have been activated because of a power surge. Wait 30 seconds and then turn on again. If this happens frequently, the
voltage in your house may be abnormally high or low.
Unplug. Wait five minutes. Plug in again.
Chapter 8
Graphics contained within this publication are for representation only.

Other Information

41

Advertisement

Table of Contents
loading

Table of Contents