Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for ENYA MUSIC NEXG 2
Summary of Contents for ENYA MUSIC NEXG 2
- Page 1 USER MANUAL...
- Page 2 CONTENTS CONTENTS GET TO KNOW THE NEXG 2 TUNER To obtain the PDF manual Enter the following URL in your OVERVIEW HOW TO TUNE YOUR NEXG 2 browser: https:/ /www.enya-music.com/ SPECIFICATIONS TUNING ALERT pages/downloads-user-manual EFFECTS ASSEMBLY INSTRUCTIONS I/O PANEL Before using this unit, it's rec- SWITCH PRESETS ommended to read "IMPORT-...
-
Page 3: Table Of Contents
CONTENTS CONTENTS WIRELESS FOOTSWITCH PAIRING EFFECT PRESETS MANAGEMENT WIRELESS FOOTSWITCH INSTRUCTIONS REPLACING EFFECT PRESETS WIRELESS FOOTSWITCH INDICATOR LIGHTS EDITING EQ REPLACING STRINGS EDITING EFFECT PRESETS TRUSS ROD ADJUSTMENT EDITING EFFECT CHAIN MICROPHONE EFFECT PARAMETERS ADVANCED ACOUSTIC PROFILING APP INSTALLATION ADVANCED ACOUSTIC PROFILING - SIGNAL SAMPLING SWITCH EFFECT PRESETS IN THE APP ADVANCED ACOUSTIC PROFILING - RESULT 4 MANUAL... - Page 4 OVERVIEW CONTENTS Headstock MIXER Zero Fret VOCAL SETTINGS Strings AUDIO SETTINGS SYSTEM SETTINGS LOOPER AND DRUM MACHINE IN APP Detachable Upper Body DRUM MACHINE IN APP Frame Speaker LOOPER IN APP IMPORTANT NOTES Bridge Saddle WARRANTY Bridge Hole Cover Indicator Light I/O Panel 6 MANUAL MANUAL 7...
- Page 5 SPECIFICATIONS Tuning Peg Fretboard Side Marker 38.2 inches Strap Button & Frame Bolt 11.90 inches 3.36 inches Control Panel Model NEXG 2 Smart Audio Guitar Size 38-inch Detachable Body Strap Button & Frame Bolt 8 MANUAL MANUAL 9...
- Page 6 Finish Satin Scale Length 23.7 Inches Battery Power 16.8V/2600mAh Round-End Nickel Silver Fret Max Charging Power Body Carbon Fiber Composite Wireless Audio V5.1 Fretboard Carbon Fiber Composite Screen 2.0 inch color touch screen display Bridge Carbon Fiber Composite Speaker Enya AR technology speaker, rated power 50W, peak power 80W Tuning Peg Enya 1:21 Steel Tuning Peg...
- Page 7 Phone Jack Line Out Jack Mic In Jack 1. Attach the detachable upper body frame to NEXG 2 by insert- ing it into the grooves near the headstock and bridge. USB Port 2. Secure the body frame with the provided screws, using the lon- A USB Type-C port for charging and data transfer, including OTG* ger screw for the headstock and the shorter screw for the bridge.
- Page 8 6.5mm input for external microphones and instruments. Imped- ance is optimized for microphones, which may cause tonal loss for Display Screen instruments. Function Key A Press for Tuner Mode. Hold to remove vocals when using NEXG 2 as a Bluetooth speaker. 14 MANUAL MANUAL 15...
- Page 9 CHARGING Function Key B Press to mute the strings on NEXG 2. Hold to activate Bluetooth and connect smartphones for audio playback. Main Knob Use this knob to adjust values by turning it clockwise or counter- clockwise. • Turn to change the master volume.
- Page 10 1. Connect the provided power adapter to the NEXG 2's charging during the initial power-up or after a factory reset. The device sup- port. Or place the NEXG 2 on the charging stand, and connect ports both Chinese and English.
- Page 11 Icon Function After skipping the activation pop-up notification or if the device is Headphone connected. already activated, the NEXG 2 will land on the Main Menu. Vocal removal mode on (Removes vocal signal from audio played through Status Bar wireless audio.)
- Page 12 Icons in Settings Icons in Settings Icon Name Function Guitar Output Adjust the output level of the guitar. Wireless Footswitch Adjust the input level of line-in micro- Mic In Wireless Footswitch status phones. is indicated as "paired" when it successfully connects. Adjust the input level of wireless Wireless Mic microphones.
- Page 13 B; string: High E. Tune Up (Too Low) How to Tune Your NEXG 2 Tighten the tuning peg of the string until the meter on the display Note Order reaches the center and turns green. Repeat for each string until A→A#→B→C→C#→D→D#→E→E#→F→G→G#→A→A#...
- Page 14 When the pitch is in tune, there will be a beep sound for notification. Tuning Alert There are three alerts of Tuner available on your NEXG 2 guitar, Voice which can be selected directly on the touch screen or via the Enya Provides vocal guidance throughout the tuning Music app.
- Page 15 EFFECTS Save / Cancel NEXG 2 has 4 preset banks: Acoustic, Rock, Fusion, and Lab, with 5 patches in each bank. Switching Presets To switch to a different preset, simply press the main knob To save the new patch to the and select a different bank.
- Page 16 Drum Machine The NEXG 2 guitar's Drum Machine uses real drum kit samples to re- produce the beats of a live drummer. With a tempo range of 40BPM to 260BPM, you can customize the tone, vibe, and texture of these ❶...
- Page 17 FOLLOW Mode Beats Genres ❹ Swipe up and down to browse through different genres of beats. Press this button to select a genre that you want to use. Returning to Other Interfaces ❺ To exit the Drum Machine interface and return to the Main Menu, press "Return".
- Page 18 Looper The number of measures played will be determined by the sys- tem, which will automatically quantize the length. If you stop re- The Function Keys A and B and the Main Knob in the Looper have cording before the current measure ends, the system will cut the different functions than in the Main Menu.
-
Page 19: Wireless Footswitch Pairing
The NEXG 2 guitar's Looper, or loop station, lets you record and play Wireless Footswitch Paring back musical phrases, and add additional content to create layered compositions. The maximum recording length is 70 seconds, and the feature can be accessed through wireless Footswitch. -
Page 20: Wireless Footswitch Instructions
Mode (only one indicator will be on). In case the pairing attempts fail, hold the Footswitch icon on the NEXG 2 Settings screen to cancel the current pairing, and repeat the pairing process. The power indicator light will flash while charging and remain on when it is fully charged. - Page 21 Wireless Footswitch - Preset Mode Wireless Footswitch - Looper Mode After the Footswitch is connected to NEXG 2, when the guitar is in In this mode, you can easily switch between the banks of NEXG 2 Looper Mode, or if you press FS1 + FS2, when the Footswitch is in by pressing FS1-4.
-
Page 22: Wireless Footswitch Indicator Lights
Wireless Footswitch Indicator Lights FS Number Press Hold The Wireless Footswitch provided with NEXG 2 has three main Drum machine (Follow Mode) on/off functions: • Switch effect presets or enter different modes. • Looper control. Tap tempo • Status indicator for low battery and paring. - Page 23 Indicator Lights in Looper Mode FS Number Status of Function Color Light FS Number Status of Function Color Light Drum Machine Blue (Follow Mode) OFF Not Recording (Empty) Blue Drum Machine Recording White (Follow Mode) ON Dubbing Yellow Flash Blue based on Playback Green...
-
Page 24: Replacing Strings
The Wireless Footswitch sends command data to NEXG 2 and receives status data from it. As a result, certain operations on NEXG 2, such as switching banks, can change the indicator on the Footswitch. Insert the string knot into the slot on the bridge. -
Page 25: Truss Rod Adjustment
TRUSS ROD (NECK) ADJUSTMENT Pull up and tighten the strings. To adjust the truss rod: 1. Loosen the strings and then remove the cover on the head- stock. 2. Locate the truss rod adjust- ment point and use the provid- ed hex wrench to turn it. -
Page 26: Microphone
Select NEXG 2, then it will pair, con- nect and land on the editing page. 2. On the NEXG 2 screen, go to "Settings," swipe to the bottom, and You can also rename your device on select the "Mic Pairing" button. If the button starts flashing, press the the scanning page. -
Page 27: Switch Effect Presets In The App
After downloading and installing the Enya Music app, connect your With the Enya Music app, you can easily manage preset patches NEXG 2 device to the app to access the editing interface. This will on your NEXG 2. allow you to easily switch presets using the app. -
Page 28: Replacing Effect Presets
12 dB. lecting to ensure it's what you want. Note that if you are using the speaker on NEXG 2, you should pay Press "Replace" after selecting a patch to replace it with an online attention to controlling the gain of EQ to avoid feedback issues. -
Page 29: Editing Effect Presets
Editing Effect Presets NEXG 2 offers 7 types of effects, including Compressor, Distortion, Octave, Mod. /Flt. (Modulation and filter), Delay, and Reverb. In addition, you can also adjust the Dry Through Level and the Pickup Level. The middle section of the interface displays the parameters that can be adjusted for the selected effect. - Page 30 To switch the effects on/off, simply swipe up or down on the effect If you choose Mod. /Flt., Delay, or Reverb, you can fine-tune the block in the effects chain. When an effect is turned off, its block effect by adjusting the knob provided. This will allow you to tweak will be in a darker color and located above the chain.
- Page 31 Patch renaming in the app will be automatically synced with the NEXG 2 device. When you save a changed patch and if the thumbnail has not been customized, the system will automatically update the image from the app to indicate that the patch has been successfully changed.
-
Page 32: Editing Effect Chain
Level Follow the step-by-step guide shown in the App to press a button. After A.I. Profiling Learn pressing, use NEXG 2 to collect the signal of an acoustic guitar and adjust its tone. When the input signal level exceeds Thresh- a certain amount, compression will be applied. - Page 33 Effects Parameter Details Effects Parameter Details Adjust the length of time for the com- Adjust the oscillation frequency of Rate pressor to continue working after the the chorus effect. Release signal moves below the threshold. Adjust the amount of pitch variation Compressor Depth Mod./Flt.
- Page 34 Effects Parameter Details Effects Parameter Details Adjust the range of sweeping fre- Pre- Adjust the time until the reverb Range Mod./Flt. quency. Delay sound appears -Auto Wah Adjust the balance of volume be- This sets the frequency where the tween the input signal and the signal High-Pass filter starts affecting the High- processed by auto-wah.
-
Page 35: Advanced Acoustic Profiling - Signal Sampling
10 seconds, starting from the low E/ 6th string to the high E/ 1st string. It's important to play the NEXG 2 has a sound profiling algorithm that optimizes the sound strings with consistent strength. After the profiling is complete, the... -
Page 36: Advanced Acoustic Profiling - Result
Mixer If the results of the sound profiling process are not satisfactory, The NEXG 2 App and touchscreen provide options for adjusting there are several methods available for adjustment. These meth- the output gain of each channel in the mixer interface, with the ods include addressing factors such as the sampling environment, slider bar on the left used to adjust the gain level from 0-100. -
Page 37: Vocal Settings
"Pickup Level" and "Dry Through Level" in the Effects editor. To balance the guitar sound and vocals when using the built-in speaker system of NEXG 2, adjust the level of "Guitar Output" in the app mixer or screen settings. -
Page 38: Audio Settings
12dB in the middle-frequency bins of each band. Tips: 1.When using NEXG 2's built-in speaker, it is important to pay at- tention to the gain levels of the EQ to avoid feedback issues. 2.Mic. In and Wireless Mic. share a common set of effects settings. -
Page 39: System Settings
Access the setting to adjust or disable the feature. Factory Reset: To restore the NEXG 2 to its original settings, you can use the "Fac- Tuner: tory Reset" option located in the "Settings" menu on the NEXG 2 Choose the type of tuning you'd like to use by selecting the Tuner screen. -
Page 40: Looper And Drum Machine In App
Looper and Drum Machine in APP Drum Machine in APP To access the Looper and Drum Machine interface, press the "Tool" button on the guitar. ❶ ❷ ❶ ❷ ❸ ❸ ❹ ❶ Turn on/off the Drum Machine. ❶ Adjust the level of the Looper and Drum Machine. ❷... -
Page 41: Looper In App
Looper in APP ❹ Use the Play and Stop button to start and stop playback. ❶ ❺ Use the Clear button to erase all recorded loops and start fresh. ❷ ❸ ❹ ❺ ❶ Use the Drum Machine FOLLOW button to sync the tempo of your loops with a built-in drum machine. -
Page 42: Important Notes
IMPORTANT NOTES • It’s highly recommended to use the provided power adapter and • Do not infringe on any third-party copyright laws. Enya assumes USB cable to charge the device. The use of other power adapters no responsibility for any infringements arising from the use of this may cause damage to the equipment or lead to electric shock. -
Page 43: Warranty
UNDER THE WARRANTY. LIMITED WARRANTY THE CUSTOMER SHALL NOT HAVE ANY CLAIM UNDER THIS WARRANTY FOR ENYA MUSIC, INC. WARRANTS ITS PRODUCT TO BE FREE FROM DE- FECTS IN MATERIALS AND WORKMANSHIP UNDER NORMAL USE REPAIR OR ADJUSTMENT EXPENSES IF: FOR A PERIOD OF ONE YEAR FROM THE DATE OF ORIGINAL PUR- CHASE. - Page 44 The product is exposed to heating or cooling sources that cause dam- defective products, the cost of repairing is on the customer. The amount age to the instrument. of repair cost is case by case. Enya Music, Inc. will notify the customer of the amount of the fixing fee. •...
- Page 45 ENYA MUSIC (CHINA) Qiuchang, Huiyang, Huizhou, Guangdong 516221 www.enyamusical.com ENYA MUSIC (USA) 6132 Westline Dr. Houston, TX 77036 www.enya-music.com...
Need help?
Do you have a question about the NEXG 2 and is the answer not in the manual?
Questions and answers
Супер перестал работать, мигает голубым цветом
The ENYA MUSIC NEXG 2 is flashing blue because it is in "Undo" or "Redo" mode. It has not stopped working; the flashing blue light indicates that footswitch 1 is being used for the undo/redo function.
This answer is automatically generated
No sound coming from speaker
There could be several reasons why there is no sound coming from the ENYA MUSIC NEXG 2 speaker:
1. Battery Issue – The built-in battery might be depleted. Ensure the guitar is charged.
2. Speaker Connection – If the speaker is removable, check that it is properly attached.
3. Volume Settings – The volume might be turned down. Adjust the settings using the 2-inch touchscreen display.
4. Audio Output Mode – If headphones or line-out is connected, the speaker may be disabled.
5. System Malfunction – Restart the guitar or check for issues with the Enya ES3 Smart Audio system.
6. Bluetooth Connection – If using wireless mode, ensure proper pairing with the smart device.
If none of these resolve the issue, the speaker might be faulty and require technical support.
This answer is automatically generated
Супер, просто мигает синим цветом, что делать?