Operating Audio System Functions - RCA RCU600BL User Manual

RCU600BL_IB.qxd 10/17/03
6. Aim the remote at the AUDIO component. Press the ON•OFF
key. If your AUDIO component turns off, you have found the
correct code. If your AUDIO component does not turn off,
repeat steps 3-6 above, entering the next code for your brand.
7. With your AUDIO component on, press the VOL +
(VOLUME UP) key. If the AUDIO component responds,
no further programming is required.
8. Enter the code in the box provided on this page for
future reference.
9. If none of the codes work or your brand is not listed,
use one of the Code Search methods to program this remote.
(See Code Search section on page 10).

Operating AUDIO System Functions

The following is a list of instructions for operating Audio functions. Not all functions work for all
brands. Experiment with your AUDIO system to determine which functions work with your
components. See the enclosed AUDIO Code List to operate your brand of equipment.
TURNING ON THE RECEIVER
OR MINI-SYSTEM
Point the remote control at the receiver and press
the AUDIO key and then the ON•OFF key to turn
the system on.
SELECTING A COMPONENT INPUT
Component inputs such as a DVD player or VCR
may be selected depending on the features of your
receiver or mini-system. Input selection may be
made either by pressing the labeled number key
or pressing the FUNCTION key to toggle through
the inputs available on your system.
Note: You may need to experiment with your
system since manufacturers' products do not
all work in the same manner.
USING THE NUMBER KEYS TO
CHANGE AUDIO INPUTS
To select a component, press the number key
(1-6) that corresponds with the component
you want to operate (CD, TAPE, TUNER, TV,
VIDEO 1, or VIDEO 2).
USING THE FUNCTION KEY TO
CHANGE AUDIO INPUTS
To select a component, press the FUNCTION key
until the input you want to operate appears on
your system.
8:09 Page 9
OPERATING THE AM·FM TUNER
1. Press the AUDIO key and then the ON•OFF
key to turn the system on.
2. Press the TUNER (3) key.
3. Press the AM·FM key to toggle between AM
and FM.
4. Use the Preset (CH+/CH-) keys to move up
and down channel presets.
OPERATING A HOME THEATER
SURROUND SOUND SYSTEM
1. Turn the TV on.
2. Press the AUDIO key and then the ON•OFF
key to turn the system on.
3. Select the AUDIO input either by using the
labeled number keys or the FUNCTION key.
4. Press the VOL+ or VOL- keys to control
volume.
: The VOLUME keys may operate both
Note
TV and receiver volume at the same time.
If this presents a problem, it may be resolved
by entering the TV menu and disabling the
TV speakers.
CONTROLLING THE
SURROUND SOUND FEATURE
Press the DELAY+ or DELAY- key to achieve
the desired delay effect.
Press the DSP ON•OFF key to turn DSP
(Digital Signal Processing) on or off.
Press the DSP MODE key until the desired
effect is achieved.
Press the TEST key to listen to speaker levels.
Press FRONT, CENTER, or REAR keys to
select speakers.
Press the LEVEL+ or LEVEL- keys to adjust
the speaker levels.
ON•OFF
VOL +
AUDIO SYSTEM CODE
9