Connecting Lyra Hd To The Computer; Transferring Files To Lyra Jukebox - RCA Lyra RD2850 User Manual

Getting Started: Software Setup

Connecting Lyra HD to the Computer

Connect the Lyra Jukebox to your computer with the mini USB cable provided. Turn on
the unit by pressing the ON button. Press and hold the Play button to start USB transfer.
The Lyra Jukebox will appear as a Removal Disk drive letter.
Note: It might take several seconds for the device (the Lyra Jukebox) to be
detected, especially in Windows 2000/XP. Click Refresh in My Computer or
Explorer to make sure the device has been detected.
Note: The Lyra Jukebox is capable of transferring files at hi-speed mode of USB
2.0. This is up to 40 times faster than USB 1.1. If USB 2.0 port is available on
your computer, use it to connect to your Lyra Jukebox. The Lyra Jukebox is still
backward compatible with the older USB 1.1 ports. However, you will not be able
to take full advantage of the potential speed increase.

Transferring Files to Lyra Jukebox

You can transfer files to your Lyra Jukebox via MusicMatch Jukebox or via Windows
Explorer.
If your Lyra Jukebox isn't already connected to your computer, connect the Lyra Jukebox
to the computer using the provided USB cable as illustrated above.
Note: The USB port acts as a power source for your Lyra Jukebox.
Note: Do not disconnect the USB cable during music download. Doing so may
corrupt system files or the files being downloaded.
18