Time Display (Dvd, Video Cd, And Audio Cd); Selecting A Title On Dvds Or A Track On Audio Cds Or Video Cds; Chapter Icon (Dvd) - RCA DRC8060N User Manual

01

Time Display (DVD, Video CD, and Audio CD)

This feature displays the time that has elapsed during playback. For DVD discs, the time displayed refers to the current title and acts as a
Time Search feature. For example, if you like a particular scene in a movie, you can enter the elapsed time the scene plays and skip right
to it.
Hour Seconds
Minutes
1. Highlight the Time Display and use the number buttons on the remote to enter the elapsed time you want to go to in that title. You
Notes:
For Audio CDs, the time displayed refers to the track that's playing.
Some portions of a disc might prohibit searching or scanning, such as warnings or opening credits.

Selecting a Title on DVDs or a Track on Audio CDs or Video CDs

Some discs contain more than one title. For example, there might be four movies on one disc (each movie might be considered a title).
Each title is divided into chapters.
To select a title via the Info Display, highlight the Title icon with the right arrow button on the remote control. Press the up or down
arrow button to go to the next title: When you're playing a VCD or an Audio CD, use these instructions to go to a different Track.
Notes:
You can also use the number buttons on the remote to enter the title/track number.
Many discs only have one title.
Some DVD movies don't allow you to select titles from the Info Display. You must use the DVD's disc menu.

Chapter Icon (DVD)

Because DVD discs use digital technology, a title can be divided into individual chapters (similar to tracks on a CD). You can skip to a
specifi c chapter by using the Chapter feature in the Info Display.
1. While a disc is playing, press INFO on the remote (the Info Display appears).
2. Press the right arrow button until the chapter icon is highlighted.
3. Press the up and/or down arrow buttons to go to different chapters.
Notes:
You can also use the number button(s) on the remote to enter the chapter you want to play—you may need to enter 2 digits,
Shortcut
depending on the number of chapter there are on the disc (for example, if there are 14 chapters, to go to chapter 4, press 0 and
While you' r e playing a
then press 4). The movie starts playing at the beginning of the chapter you entered.
disc, you can use the
The Chapter feature won't work if the disc isn't formatted with separate chapters.
CH +/ CH– buttons to
go to the next chapter
When you're recording onto DVD+R and DVD+RW discs, chapter markers are added according to how you have them
or previous chapter.
set up in the Setup Menu (off, 5 minutes, 10 minutes, or during commercial breaks). See page 33 for more information
about chapter markers and Commercial Advance.
must use two digits for each fi eld. For example, if you enter 01:35:12, playback will start one hour, 35 minutes, and 12 seconds into
the title.
Graphics contained within this publication are for representation only.
Chapter 4: Playing Discs
JPEG Info Display... go to page 45.
41