Sources Of Danger; Burn Danger; Fire Danger; Electrocution Warning - CASO DESIGN VC10 Instructional Manual

Please note
► Only qualified electricians, who have been trained by the manufacturer, may carry out any
repairs on the unit. Improperly performed repairs can cause considerable dangers for the user.
► Only customer service departments authorized by the manufacturer may carry out repairs
during the guarantee period, otherwise the guarantee entitlements will be null and void in the
event of any subsequent damages.
► Defective components must always be replaced with original replacement parts. Only such
parts will guarantee that the safety requirements are fulfilled.
► Do not leave the unit unsupervised during operation.
► When finished, please unplug by grasping the plug and not the cord, to avoid any injury.
► For the correct storage, please slightly close the cover, do not lock, it will deform the
gaskets and affect the machine function.
► Do not immerse in water or any other liquids and do not put in the dishwasher.

2.3 Sources of danger

2.3.1

Burn danger

Warning
Some of the appliance's surfaces can become very hot. Adhere to the following safety
guidelines to reduce the risk of burns.
► The sealing bar can become very hot during operation. Never touch the sealing bar while
the unit is on.
2.3.2

Fire danger

Warning
There is a danger of fire if the appliance is not used properly.
Observe the following safety notices:
► Do not set up the unit near flammable material.
► Keep this appliance away from all other sources of heat, such as stovetops, ovens, etc.
2.3.3

Electrocution Warning

Danger
There is a risk of electrocution if the unit is used improperly!
Due to the risk of electrocution never attempt to touch or repair live wires or subassemblies.
Observe the following safety guidelines to avoid dangers due to electrical power:
► If the power cord connection to the main unit is damaged, you will need to have it repaired
or replaced by an authorized electrician.
► Do not operate this unit if its power cord or plug appears to be damaged, malfunctioning or
if the unit has been dropped. If the power cord is damaged, you will need to have it replaced
by an authorized electrician or the manufacturer to avoid risk of injury.
Caso Vacuum Sealer System VC10 8