Auto-Zero Function; Reset To Factory Setting - KERN EMS Instruction Manual

Use this function to enable or to disable the automatic zero
Auto-Zero
position
function
 In weighing mode keep the UNIT key pressed until [AF]
0.0
g
 Press the MODE key: „tr" is displayed.
AF
TR
 Acknowledge using SET key, the current setting is displayed.
TR Qn
 Select the desired settings by pressing the MODE key
0.0
 Use the SET key to confirm selection. The balance returns to
g
This function resets all menu items to factory setting
Reset to factory
setting
 In weighing mode keep the UNIT key pressed until [AF]
0.0
g
AF
 Press the MODE key twice: „rSt" is displayed.
RST
 Acknowledge using SET key, the current setting is displayed.
RST Qn
 Select the desired settings by pressing the MODE key
0.0
 Use the SET key to confirm selection. The balance returns to
g
EMS-BA-e-1213
appears.
weighing mode.
appears.
weighing mode.
23