Advertisement
Quick Links
PLASTIC
HOSE AND
PIPE CUTTER
31985
1. Scope
This product is designed for cutting thick- and
thin-walled plastic tubes and moulding of up to
35mm (1
/
") in diameter.
3
8
Any other application beyond the conditions
established for use will be considered misuse.
Draper Tools accepts no responsibility for improper
use of this product.
Important: DO NOT use this tool to cut reinforced
materials. If the blade does not penetrate the
workpiece, do not continue to use the tool.
Example cross-sections of compatible
cutting profiles.
Draper Tools Limited, Hursley Road, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF
2. Health and Safety
Instructions
WARNING! Keep your hands clear of the
blade and cutting area while in use.
• ALWAYS retract the blade when not in use.
• DO NOT allow untrained users to operate
this product.
• Keep this product out of reach of children.
• Store this product in a clean and dry environment,
out of direct sunlight.
Website: drapertools.com
EN
Original Instructions
Version 2 – February 2023
E -mail: sales@drapertools.com
Advertisement
Related Manuals for Draper Expert 31985
Summary of Contents for Draper Expert 31985
- Page 1 • DO NOT allow untrained users to operate this product. • Keep this product out of reach of children. • Store this product in a clean and dry environment, out of direct sunlight. Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire, SO53 1YF Website: drapertools.com E -mail: sales@drapertools.com...
- Page 2 3. Operating Instructions 2. Unscrew the retaining screw (4) and remove the blade guard (5). 1. Place the material to be cut into the tool jaw, with the blade (1) directed at the vertical centre of the workpiece. 2. Squeeze the trigger (2) slowly and repeatedly to extend the blade and cut the material.
Need help?
Do you have a question about the Expert 31985 and is the answer not in the manual?
Questions and answers