5. Operation
5.1
Safety instructions
(Example)
HFB-BA-e-1814
Risk of injury due to falling loads!
DANGER
Always work with particular care according to the general
rules for crane operation.
Check all parts (hook, eyelet, rings, rope slings, cables,
chains etc.) for excessive wear or damage
If faults can be seen on the safety bracket of the hook or
if it is missing completely, the scales must not be used.
Work only with appropriate speed.
Always avoid vibrations and horizontal forces. Avoid any
kind of shock, torsion and oscillating (e.g. caused by
inclined suspending).
Do not use the crane scales for transport of loads
Do not stand or go under suspended loads.
Do not use on building sites.
Suspended loads have to be observed constantly.
Do not exceed the nominal load of crane, crane scales
or any kind of load attachment devices at the crane
scales.
For weighing dangerous goods (e.g molten masses,
radioactive materials) the "Dangerous Goods
Regulations" are to be regarded!
17