Maintenance - Vacmaster VBVB611PF 1101 Operator's Manual

EMPTYING THE COLLECTION TANK
WARNING:
BEFORE REMOVING THE POWER HEAD FROM COLLECTION TANK.
1
1. Verify that the power cord is disconnected from the outlet (Fig. 1).
2. Disconnect the hose from the vacuum (Fig. 2).
3. Undo the latches and remove the power head from the collection tank (Fig. 3). Place power
head on a soft, clean surface upside down.
4. Clear all dirt or debris from the collection tank and hose into a proper waste container (Fig. 4).
6. Check the hose, attachments, and power cord to verify that they have not been damaged.
7. Place power head on collection tank and secure latches.
IMPORTANT!
FILTER FOR DRY VACUUMING.
NOTICE!
immediately.
STORAGE
Before storing your vacuum, the collection tank should be emptied and cleaned. The accessories
should be should be cleaned and stored so they can be readily available when needed. Store the
wet/dry vacuum indoors.
REPAIRS
only identical replacement parts.

MAINTENANCE

ALWAYS DISCONNECT THE PLUG FROM THE POWER OUTLET
2 3
4
13
ALWAYS USE DUST