Installation
Use wire nuts to
connect the wires from
the 24VAC transformer
to the yellow and the
yellow/white striped
wires on the control
module (polarity does
not matter for this
connection). When the
connections are secure,
coil the wires and push
them back into the
electrical box.
Set the burner assembly into the
enclosure. Take care not to scratch the
powder coat on the enclosure.
Reinstall the screws that secure the burner
assembly into the enclosure.
© Travis Industries, Inc.
(qualified installers only)
5/15/23 - 1579
Make sure wires are in the
electrical box under the burner tray.
This will ensure they do not touch
anything hot.
Outdoor Complete Linear Fire Pits
19