OPERATION
Adjusting the Airflow Rate
You can adjust the airflow rate to increase your comfort.
To adjust the airflow rate setting
Tips for saving energy
• Be careful not to cool the room too much�
Keeping the temperature setting at a moderate level helps save energy�
- Recommended temperature setting for cooling is 26�0-28�0°C�
• Cover windows with a blind or a curtain.
Blocking sunlight and air from outdoors increases the cooling effect�
• Clogged air filters cause inefficient operation and waste energy.
Clean them once in about every 2 weeks.
10
Press
.
• Each pressing of the button change the airflow rate setting in
sequence shown below.
Auto
• When the airflow is set to "
and the noise from the unit will become quieter.
• In indoor unit quiet operation, the airflow rate is set to a weak level.
• If the temperature dose not reach the desired point, change the
airflow rate setting.
• If COOL/DRY operation is started with airflow settings on "AUTO",
the indoor unit will initially deodorise, which functions to suppress any
internal odours. As a result, the indoor unit will not emit air
immediately. (Wait for about 1 minute.)
• At smaller airflow rates, the cooling effect is also smaller.
Indoor unit quiet
Low
", indoor unit quiet operation will start
High