Setting Up Your USB Adapter... 2 Headset Settings ... 3 Headset Settings for MX500i: ... 4 Headset Settings for M214i: ... 5 Internet Calling Services Settings... 6 Settings for Skype:... 7 Settings for Yahoo! Messenger with Voice:... 8 Settings for Google Talk:...
Setting Up Your USB Adapter: To set-up your USB adapter: 1) Plug the 2.5mm jack of your Plantronics Internet Headset into the 2.5mm plug of the USB adapter. 2) Plug the USB connector into the correct port on your computer.
3. If the person on the other end can not hear you well, try adjusting you microphone adjustment switch. This switch is on the side and adjusts your outgoing volume. You may need a paperclip or pen to adjust it. Internet Headset Online User Guides to ensure the mute button is off. Page 4 of 13...
Headset Settings for M214i: For the best sound experience from your M214i, please check that: 1) Your talking volume is optimized 2) Your mute button is not on 3) Your listening volume is optimized Internet Headset Online User Guides 1. To adjust the volume that you hear the other person at, adjust the rolling knob on the side of the pod.
Method 2: Internet Calling Services Settings This should be done regardless of which service provider you use. Internet Headset Online User Guides Page 6 of 13...
Settings for Skype: (Ver 2.5.0.141) The following adjustments are to make sure that Skype recognizes your internet headset: Step 1: Open up Skype Step 2: Click ‘tools’ > ‘Options’ (from the top navigation, Figure 1) Step 3: Select ‘Sound Devices’ (from the left hand column) Step 4: In ALL 3 drop down menus (Audio In, Audio Out, and Ringing) select ‘USB...
Step 3: Click ‘Next’ on the wizard: Step 4: Speak into your headset and see if the bars light up. If not, select ‘USB Audio Device’ from the drop down menu. Click next: Internet Headset Online User Guides Page 8 of 13...
Page 9
Step 5: Listen for music. If you can not hear music, select ‘USB Audio Device’ from the drop down menu. Click next: Step 6: Click Finish Internet Headset Online User Guides Page 9 of 13...
Click ‘audio’ in the left navigation of the settings window Step 4: Select ‘USB Audio Device’ in ALL 3 of the drop down menus in the audio screen. See picture above. Step 5: Click OK. Internet Headset Online User Guides Page 10 of 13...
Windows XP systems. However, this setting adjustment should also be available in other versions of Windows. Make sure your USB adapter is connecting your headset to your computer. Start > Control Panel >...
It is barely noticeable but for some users, the absence of sidetone might affect the overall sound experience. Make sure your USB adapter is connecting your headset to your computer. Start >...
Need help?
Do you have a question about the M214i and is the answer not in the manual?
Questions and answers