First Setup - Planar PL2410W User Manual

First Setup

Congratulations on your purchase of this high performance TFT LCD monitor.
This TFT LCD Monitor comes with the following accessories :
 LCD Monitor
 Power Cable
 VGA Cable (15 pin)
Install the stand base
1. Lay the TFT LCD Monitor flat on a table with the LCD screen face down. To prevent the monitor
from being scratched, put a piece of soft cloth on the table on which the screen will be set.
2. Unpack the base, one hand hold the monitor, the other hand attach the base to the stand.
3. Stand the TFT LCD Monitor up.
Uninstall the stand base
1. Lay the TFT LCD Monitor flat on a table with the LCD screen face down. To prevent the TFT LCD
Monitor from being scratched, put a piece of soft cloth on the table on which the screen will
be set.
2. Hold the monitor down with one hand. With the other hand, use two fingers to press the
hooks down as directed below.
3. Remove the base from the stand.
 User's Guide
 Base
3