Water Inlet Hose With Safety Valve - Electrolux AEG FAVORIT 64080 VIL Instruction Book

Table of Contents

Advertisement

152958 39/0en
16-02-2005
Installation instructions

Water inlet hose with safety valve

After connecting the double-walled water inlet hose, the safety valve
is next to the tap. Therefore the water inlet hose is only under pressure
while the water is running. If the water inlet hose starts to leak during
this operation, the safety valve cuts off the running water.
Please take care when installing the water inlet hose:
- The electrical cable for the safety valve is in the double-walled
water inlet hose. Do not immerse the water inlet hose or the safety
valve in water.
- If water inlet hose or the safety valve is damaged, remove the mains
plug immediately.
- A water inlet hose with safety valve must only be replaced by a
specialist or by the consumer services department.
- Place the water inlet hose in such a way that it is never higher than
the bottom edge of the safety valve.
44
10:50
Pagina 44

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AEG FAVORIT 64080 VIL and is the answer not in the manual?

Questions and answers

Table of Contents