Initial Settings Menu; Using The Initial Settings Menu; Digital Audio Out Settings - Pioneer DV-578A Operating Instructions Manual

Initial Settings menu

Chapter 7
Initial Settings menu

Using the Initial Settings menu

The Initial Settings menu provides audio and
video output settings, parental lock settings,
and display settings, among others.
If an option is grayed out it means that it
cannot be changed at the current time. This is
usually because a disc is playing. Stop the
disc, then change the setting.
1 Press HOME MENU and select 'Initial
Settings'.
Initial Settings
2 Use the cursor buttons and ENTER to
select the setting and option you want to
set.
All the settings and options are explained on
the following pages.

Digital Audio Out settings

Setting
Digital Out
Dolby Digital Out
DTS Out
Option
On
Off
Dolby Digital
Dolby Digital > PCM
DTS
DTS > PCM
Note
• In the table below, the default setting is
shown in bold: other settings are shown in
italics.
• The Digital Audio Out settings only need to
be set if you have connected the digital
output of this player to an AV receiver, or
other equipment.
• Check the operating instructions supplied
with your other equipment to see which
digital audio formats it's compatible with.
• Some settings, such as TV Screen, Audio
Language and Subtitle Language may be
overridden by the DVD disc. Often these
settings can also be made from the DVD
disc menu.
What it means
Digital audio is output from the digital outputs.
Note that there is no digital output when playing SACDs and
some DVD-Audio discs regardless of this setting.
No digital audio output.
Dolby Digital encoded digital audio is output when playing a
Dolby Digital DVD disc.
Dolby Digital audio is converted to PCM audio before being
output.
DTS encoded digital audio is output when playing a DTS disc.
(Noise will be output if your amplifier/receiver is not compatible
with DTS audio.)
DTS audio is converted to PCM audio before being output.
07
35
En