Subscribe to Our Youtube Channel
Related Manuals for SingularXYZ SV100
Summary of Contents for SingularXYZ SV100
- Page 1 SV100/SV100 Dual GNSS Receiver User Manual SV100/SV100 Dual GNSS ReceiverUser Manual...
-
Page 2: Proprietary Notice
SV100/SV100 Dual GNSS Receiver Thank you for choosing the .This Getting Started Guide will provide useful information about SV100. It will also guide you through your first step of using SV100/ SV100 Dual GNSS Receiver Proprietary Notice Information in this document is subject to change without notice and does not represent a commitment on the part of SingularXYZ Intelligent Technology Ltd. -
Page 3: Corporate Office
The SV100 is designed to with stand the rough environment that typically occurs in the field. However, the SV100 is high-precision electronic equipment and should be treated with reasonable care. Corporate Office SingularXYZ Intelligent Technology Ltd. Address: Floor 2, Building A, No. 599 Gaojing Road, 201702 Shanghai, China... -
Page 4: Table Of Contents
Content ....................................4 Introduction ................................1 1.1 SV100 Features................................ 1 1.2 Accessories................................1 Panel..................................... 3 1.3 SV100 connection view............................3 Connection ................................5 Receiver Status ................................ 5 Version Information............................... 5 Satellite List and Satellite SkyPlot ........................6 Position Information ............................... 6 Status Information .............................. -
Page 5: Introduction
Introduction SV100 is an excellent GNSS receiver, which is designed as a multi-purpose GNSS receiver for a wide range of applications. This chapter will introduce the main features, accessories, appearance, panel, connectorsetc. SV100 Features Full Constellation SV100 is equipped with a high-precision GNSS engine for simultaneously tracking GPS, BDS, GLONASS, Galileo &... - Page 6 SV100 Data cable Antenna cable（5m） Charger LAN cable Hooks and screws Antenna Antenna type Antenna picture SA100 geodetic GNSS antenna SV100/SV100 Dual GNSS ReceiverUser Manual...
-
Page 7: Technical Assistant
SV100 connection view SV100 is mainly used as a base station or CORS reference station, the below figure explains the connection of each equipment. As a base station to broadcast correction data in a short time, it is easy to use. You just need to prepare GNSS antenna, power supply, tripod, etc. -
Page 8: Content
Indoors ports include SV100, router, UPS(uninterrupted power supply), server, etc. The GNSS antenna and lighting rod are fixed on the ground or top of building, inner devices including the SV100, the power supply and internet, are settled in the office. SV100/SV100 Dual GNSS ReceiverUser Manual... -
Page 9: Connection
① The SV100 receiver can connect to an Ethernet network through its Ethernet port. ② Making sure that the SV100 and your computer are within the same Local Area Network. The default IP of SV100 is 192.168.1.1. Then change your computer’ s IP address. -
Page 10: Satellite List And Satellite Skyplot
Satellite list and sky plot show you the information of each satellite in using, like satellite system, azimuth, elevation, SNR etc. Position Information Position information shows you GNSS constellation system tracked, coordinates, positioning status, time etc. SV100/SV100 Dual GNSS ReceiverUser Manual... -
Page 11: Status Information
Status Information Status information shows you working mode and work status. Device Configuration This menu is prepared to do basic configuration of your receiver. Satellite Tracking SV100/SV100 Dual GNSS ReceiverUser Manual... -
Page 12: Working Mode
3) Status: Choose on\off to enable or disable satellites system. For SBAS mode, you can choose WAAS\SDCM\EGNOS\MSAS\GAGAN. Working mode There are 3 work modes you canchoose: Rover mode: configure the receiver as a rover station. Base mode: configure the receiver as a base station. SV100/SV100 Dual GNSS ReceiverUser Manual... -
Page 13: Ethernet Config
Single mode: configure the receiver in single point positioning mode. Ethernet config Edit IP information of Ethernet. DDNS config Start up or shut off DDNS, it supports No-IP, DynDNS, FreeDNS, Zoneedit. Registered address: SV100/SV100 Dual GNSS ReceiverUser Manual... - Page 14 ● Connect SV100 to router through network cable For example, the IP of the router is 192.168.31.1, the static IP of SV100 should be 192.168.31.* ● Login the web of SV100, enter user, password, domain name and click startup.
-
Page 15: Nat_Ddns Config
● Finally, you can use the domain name and external port to login the web of SV100, realizing checking status and configuring remotely. NAT_DDNS config Start up or shut off NAT_DDNS, supporting NATAPP andNGROK. Registered address: https://natapp.cn https://ngrok.com NAT-DDNS（Network Address Translation- Dynamic Domain Name Server）... - Page 16 Preparation: SV100, a fixed domain name, internet, computer ● Insert a SIM card or connect SV100 to router through network cable, making sure it get internet. ● Login the web of SV100. Enter domain name and authtoken code and click startup ●...
-
Page 17: Antenna Setting
Set height and measurement for antenna, and click GET to choose the antenna type of your external antenna. Password Setting Set password of login, the original password are admin. Register Setting Enter register code to get a permanent or temporary use. SV100/SV100 Dual GNSS ReceiverUser Manual... -
Page 18: Work Management
Work Management ① Data transmission: there are 3 ways to transmit the data, 1 serial port、2 TCP、3 NTRIP Transmission SV100/SV100 Dual GNSS ReceiverUser Manual... - Page 19 The format of Data flow includes NMEA-0183、observation data, RTCM, CMR and custom data. Work flow: ● Set suitable baud rate ● Set data type, ● Choose the data type and specific data ● Finally check startup ● Click OK. SV100/SV100 Dual GNSS ReceiverUser Manual...
-
Page 20: Tcp Transmission
The format of Data flow includes NMEA-0183、observation data、RTCM、CMR and custom data. Work flow: ● Set SV100 as base or rover in working mode interface ● Choose work mode, TCP client or server ● Enter IP and port ● Choose the data type and specific data... -
Page 21: Ntrip Transmission
(supporting Ntrip Caster protocol) running in the server. If you have a static IP address, you can use Ntrip Server and Ntrip Caster of SV100 simultaneously to create a single reference station. This mode does not need any software... -
Page 22: Ntrip Server
CORS. ● Click position information to check the rover’s status, and position Status should be NARROW_INT. Ntrip Server 5.3.2 ● Before setting the Ntrip Client, you should configure the receiver as Base mode. SV100/SV100 Dual GNSS ReceiverUser Manual... - Page 23 ● Enter the Mount Point list(enter SN number usually) ● Choose the diff data type ● Check startup and click OK ● Click position information to check the base’s status, and position Status should be FIXEDPOS. SV100/SV100 Dual GNSS ReceiverUser Manual...
-
Page 24: Ntrip Caster
Ntrip Caster 5.3.3 SV100 can also work as a single reference station and send correction data through Ntrip Caster protocol. You need to configure both Ntrip Server and Ntrip Caster when you use this protocol. The setting is shown below: Configuration of Ntrip Server: ●... -
Page 25: Data Recording
Data record menu is designed to set the storage mode for static date, the internal memory is 8 GB, 1 Hz sample frequency could be used for 1 month record. In this page, you can know how much free memory is left to use, configure the record setting, SV100/SV100 Dual GNSS ReceiverUser Manual... -
Page 26: File Download
● Loop Recording: When storage is full, Yes means delete earliest data and store continually, No means stop recording ● Storage Space: Separate storage space in internal memory ● Record Mode: Support manual and automatic recording mode. File Download Web Download 5.5.1 SV100/SV100 Dual GNSS ReceiverUser Manual... -
Page 27: Usb Download
Connect USB cable to computer, the computer will read the data of the receive as a USB flash disk. Device control There are two functions here you can set the receiver, reboot and freset. Other function are not enable now. SV100/SV100 Dual GNSS ReceiverUser Manual... -
Page 28: Update
● Current version: it shows the firmware you are using now. ● Update File: Click Select to choose latest firmware, it only support *.ZIP format. ● Click Update and the Status will run as a process bar, when it finish, SV100 will reboot... - Page 29 FCC Caution: This device complies with part 15 of the FCC Rules . Operation is subject to the following two conditions:(1) this device may not cause harmful interference , and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Need help?
Do you have a question about the SV100 and is the answer not in the manual?
Questions and answers