Displaying The Radio Id; Sirius Satellite Radio Tuner; Basic Operations; Storing And Recalling Stations - Pioneer Super Tuner IIID DEH-P6200BT Operation Manual

Available accessories
2 Push M.C. up or down to select the de-
sired channel category.
3 Push M.C. left or right to select the de-
sired channel in the selected channel cate-
gory.

Displaying the Radio ID

1 Select the channel select settings to
CH number.
Refer to Selecting the channel select mode on
the previous page or CH select (channel select
mode setting) on the previous page.
2 Push M.C. left or right to select
RADIO ID.
# If you select another channel, display of the ID
code is canceled.
# RADIO ID and the ID codes are repeatedly dis-
played one after the other.

SIRIUS Satellite Radio tuner

You can use this unit to control a SIRIUS Satel-
lite Radio tuner, which is sold separately.
When the SIRIUS tuner is used together with
this unit, some operations differ slightly from
those described in the SIRIUS operation man-
ual. This manual provides information on
these points. For all other information on
using the SIRIUS tuner, please refer to the SIR-
IUS operation manual.

Basic Operations

Select a SIRIUS band.
1 Press BAND/ESC.
! Band can be selected from SR1, SR2 or SR3.
Selecting a channel (step by step)
1 Push M.C. left or right.
! If you push and hold M.C. left or right, you
can increase or decrease the channel number
continuously.
! You can also perform tuning from a desired
channel category. (Refer to Selecting a chan-
nel from a channel category on page 27.)
Switching the SIRIUS display
1 Press and hold
/DISP/SCRL.
Play time—Channel number—Channel name—
Category name—Artist name—Song title/pro-
gram title—Composer name
! The play time is displayed during Instant Re-
play mode. Refer to Using the Instant Replay
function on page 27.
! Play time display indicates the time inverted
from the live broadcast. The play time is dis-
played as a negative number.
Displaying the Radio ID
1 Push M.C. left or right to select CH 000.
! To select CH 000, set the channel select setting to
CH number. About the channel select setting,
refer to CH select (channel select mode setting)
on the next page.
Note
It may take a few seconds before you can hear
anything while this unit acquires and processes
the satellite signal when you change the source
to a SIRIUS tuner or select a channel.

Storing and recalling stations

Operations are the same as those of the tuner.
(Refer to Storing and recalling stations on page
11.)
Section
03
25
En