Using Preset Numbers; Making A Call By Entering Phone Number; Clearing Memory - Pioneer Premier DEH-P600UB Operation Manual

Available accessories
# If the number is already in the Phone Book
then the name is also displayed.
# Turning MULTI-CONTROL switches to the pre-
vious or next phone number diplayed in the de-
tailed list.
# If you do not operate anything within about 30
seconds, the list display is canceled automati-
cally.
4 Press MULTI-CONTROL to make a call.
# For an international call, press and hold
MULTI-CONTROL to add + to the phone number.
5 To end the call, push MULTI-CONTROL
down.

Using preset numbers

Important
Be sure to park your vehicle and apply the park-
ing brake when performing this operation.
Numbers that you dial frequently can be as-
signed to presets for quick recall.
1 Select a desired phone number from
the phone book or the call history. Or di-
rectly enter a desired phone number.
To select a desired phone number from the
Phone Book or the Call History, see the in-
structions explained in previous pages. To di-
rectly enter a desired phone number, see
Making a call by entering phone number on
this page.
2 Press and hold one of 1 to 6 on the re-
mote control to store the phone number.
The selected phone number has been stored
in memory. The next time you press the same
preset button, the phone number is recalled
from memory.
Making a call by entering
phone number
Important
Be sure to park your vehicle and apply the park-
ing brake when performing this operation.
1 Display the function menu.
Refer to Function and operation on page 43.
2 Use MULTI-CONTROL to select
Number dial in the function menu.
# You can also enter in this menu from the
standby display by pressing DIRECT on the re-
mote control.
3 Push MULTI-CONTROL up or down to
select a number.
# You can also input numbers by pressing 0 to 9
on the remote control.
4 Push MULTI-CONTROL left or right to
move the cursor to the previous or next po-
sition.
# Up to 24 digits can be entered.
5 When you completed entering the
number, press MULTI-CONTROL.
Call confirmation appears.
6 Press MULTI-CONTROL again to make a
call.
7 To end the call, push MULTI-CONTROL
down.

Clearing memory

1 Display the function menu.
Refer to Function and operation on page 43.
2 Use MULTI-CONTROL to select
Clear memory in the function menu.
3 Push MULTI-CONTROL up or down to
select an item.
Each time MULTI-CONTROL is pushed up or
down, the items are switched in the following
order:
Section
06
49
En