Setting Automatic Rejecting; Setting Automatic Answering; Switching The Ring Tone; Echo Canceling And Noise Reduction - Pioneer DEH-P4000UB Operation Manual

Available accessories
6 Press MULTI-CONTROL to clear the
memory.
While clearing, CLEARING is displayed. After
the data on the selected item is cleared,
CLEARED is displayed.

Setting automatic rejecting

1 Use MULTI-CONTROL to select
REFUSE CALLS in the function menu.
2 Press MULTI-CONTROL to turn auto-
matic call rejection on.
# To turn automatic call rejection off, press
MULTI-CONTROL again.

Setting automatic answering

1 Use MULTI-CONTROL to select
AUTO ANSWER in the function menu.
2 Press MULTI-CONTROL to turn auto-
matic answering on.
# To turn automatic answering function off,
press MULTI-CONTROL again.

Switching the ring tone

1 Use MULTI-CONTROL to select
RING TONE in the function menu.
2 Press MULTI-CONTROL to turn the ring
tone on.
# To turn the ring tone off, press
MULTI-CONTROL again.

Echo canceling and noise reduction

1 Use MULTI-CONTROL to select
ECHO CANCEL in the function menu.
2 Press MULTI-CONTROL to turn echo can-
celing on.
# To turn echo canceling off, press
MULTI-CONTROL again.

XM tuner

Listening to XM Satellite Radio

You can use this unit to control an XM satellite
digital tuner (GEX-P920XM), which is sold
separately.
For details concerning operation, refer to the
XM tuner's operation manuals. This section
provides information on XM operations with
this unit which differs from that described in
the XM tuner's operation manual.
! With this unit, you can operate two addi-
tional functions: XM channel direct selec-
tion and preset channel list.
% Select an XM band.
Press BAND/ESC.
# Band can be selected from XM-1, XM-2 or
XM-3.
% Select a channel.
Push MULTI-CONTROL left or right.
# If you push and hold MULTI-CONTROL left or
right, you can increase or decrease channel num-
ber continuously.
# You can also perform tuning from a desired
channel category. (Refer to Selecting a channel in
the channel category on the next page.)

Switching the XM display

% Press DISP to switch the XM display.
Storing and recalling broadcast
stations
You can easily store up to six broadcast sta-
tions for later recall.
! Six stations for each band can be stored in
memory.
1 Press LIST.
Preset screen is displayed.
Section
06
41
En