Advertisement
Keysight Y1276A Advanced Cooling Spacer Kit for M9484C and Related Chassis Installation Note
5 Make sure the Cooling Spacer orientation is as per below illustration. See
Figure 3
6 Slot in the Spacer Air Blocker (M9044-04105) into Cooling Spacer and rotate
7 Attach the Air Blocker against the air vents at the front of Cooling Spacer.
8 Secure the Air Blocker with two (2) M3 x 6mm Torx T10 screws (0515-1946).
Figure 4
4
Figure
3.
.
Spacer Air Blocker
M9044-04105
Cooling Spacer orientation. Please see
90º into upright orientation. See
See
Figure
4.
.
Secure spacer on the chassis with M3 x 6mm screws
Do not install Spacer Air Blocker if higher air flow performance is
needed.
Keysight Y1276A Advanced Cooling Spacer Kit for M9484C and Related Chassis Installation Note
Figure
3.
Procedure
below.
M3 x 6mm Flat
Head Torx T10
Screw
0515-1946
Advertisement
