Download Print this page

Philips Satinelle Soft HP6409 User Manual page 11

Philips satinelle hp6409 electric shaver: user guide
Hide thumbs Also See for Satinelle Soft HP6409:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
4
Rinse the epilating head under the tap for 5-10 seconds while
turning it (fig. 20).
5
Shake the epilating head firmly and dry it thoroughly with a tea
towel.The epilating head should be completely dry before you
place it back onto the appliance (fig. 21).
Cleaning the shaving head
1
Switch the appliance off, remove the adapter from the wall socket
and pull the appliance plug out of the appliance (fig. 17).
2
Remove the shaving foil from the shaving head (fig. 22).
3
Clean the shaving foil, the cutter block and the hair chamber with
the brush supplied.
Do not exert any pressure on the shaving foil to avoid damage.
1
Put the protection cap on the shaving head after use.
2
Rub a drop of sewing machine oil onto the shaving foil twice a
year.
Replacement
If you use the appliance two or more times a week, we advise you to
replace the shaving foil and the cutter block every 1 to 2 years.
A worn or damaged shaving foil may only be replaced by an original
Philips shaving foil (type no. HP6116).
The cutter block is available under type no. HP2911.
Environment
Do not throw the appliance away with the normal household
waste at the end of its life, but hand it in at an official collection
point for recycling. By doing this you will help to preserve the
environment (fig. 23).
ENGLISH
11

Advertisement

loading

This manual is also suitable for:

Satinelle soft hp6409/02