Blancett B253-102 Quick Start Manual

INTRODUCTION

The QuikSert turbine flow meter is designed with wear-resistant
moving parts to provide trouble-free operation and long service
life. The QuikSert meter repair kit is designed for easy field service
of a damaged flow meter, rather than replacing the entire flow
meter. Repair parts are constructed of stainless steel alloy and
tungsten carbide.
Each turbine meter repair kit is factory calibrated to ensure
accuracy throughout the entire flow range. Each kit is complete
and includes a new K-factor, which is the calibrated number of
pulses generated by each gallon of liquid. This K-factor will be
used to recalibrate the monitor, or other electronics, to provide
accurate output data.
N OTE:
If the meter repair kit part number ends in NCC (no
calibration), it was not factory calibrated. For these repair
kits, use the nominal K-factor supplied.

REPAIR KIT PART NUMBER INFORMATION

Repair Kit Part Number
B253-102
B253-105
B253-108
B253-109
B253-112
B253-205
B253-208
B253-209
B253-212
B253-216
B253-220
B253-330
B253-440
B253-660
B253-880
B253-990
B111109
TUR-UM-00285-EN-03 (June 2021)
Turbine Flow Meter
QuikSert Repair Kits
Flow Meter Size
3/8 in. × 1 in.
1/2 in. × 1 in.
3/4 in. × 1 in.
7/8 in. × 1 in.
1 in. × 1 in.
1/2 in. × 2 in.
3/4 in. × 2 in.
7/8 in. × 2 in.
1 in. × 2 in.
1-1/2 in. × 2 in.
2 in. × 2 in.
3 in. × 3 in.
4 in. × 4 in.
6 in. × 6 in.
8 in. × 8 in.
10 in. × 10 in.
Standard Magnetic Pickup
Part Number
B131-038
B131-050
B131-075
B131-088
B131-100
B132-050
B132-075
B132-088
B132-100
B132-150
B132-200
B133-300
B134-400
B136-600
B138-800
B139-900
All Meter Sizes
User Manual