Advertisement
Table of Contents
How to connect your new Netcomm NF18ACV nbn™ modem to
your new FTTP, Fixed Wireless or HFC connection
1. Locate the nbn™ equipment that has been installed in your premises. If
you are in a new apartment complex this is often inside the wardrobe.
2. Un-box your new Netcomm NF18ACV and plug it into the mains power.
3. Locate the next available Uni-D port on your nbn™ NTU. This is the nbn™
box installed inside your premises. In most cases you will connect to Uni-D
port 1. Your activated port is detailed in your activation emails.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for More Netcomm nbn NF18ACV
Summary of Contents for More Netcomm nbn NF18ACV
- Page 1 How to connect your new Netcomm NF18ACV nbn™ modem to your new FTTP, Fixed Wireless or HFC connection 1. Locate the nbn™ equipment that has been installed in your premises. If you are in a new apartment complex this is often inside the wardrobe. 2.
- Page 2 For FTTP connections this will look like this: Please note that you may need to remove the nbn™ cover to see/access these ports. For fixed Wireless connections, this will look like this: For fixed HFC connections, this will look like this:...
- Page 3 4. Locate the yellow Ethernet cable that was provided with your new modem and connect it from the next available (or active) Uni-D port to the blue WAN port on the back of your new Netcomm modem. Please see image below: 5.
- Page 4 Troubleshooting Tips 1. The internet light is flashing on the front of the Netcomm device. This suggests that the nbn™ authentication details are incorrectly configured in your device. This should not occur, but in rare instance that it does, please call 1800 733 368 and our team can assist in checking these details.
Need help?
Do you have a question about the Netcomm nbn NF18ACV and is the answer not in the manual?
Questions and answers