Aiways U6 Owner's Manual
  1. Manuals
  2. Brands
  3. Aiways Manuals
  4. Automobile
  5. U6
  6. Owner's manual

Aiways U6 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OWNER'S MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the U6 and is the answer not in the manual?

Questions and answers

Related Manuals for Aiways U6

Summary of Contents for Aiways U6

  • Page 1 OWNER'S MANUAL...
  • Page 3 If you wish to copy, modify or distribute the contents of the manual, please contact Aiways in time to obtain legal and valid authorization. If you wish to modify, adjust or disassemble vehicle components yourself, please contact Aiways in time to obtain...
  • Page 4 When this manual refers to a workshop visit, we recommend an Aiways service partner. Directional data in this manual, e.g. left or right, or front or back, always relate to the direction of the travel.
  • Page 5 Your Aiways U6 is equipped with a variety of driver assistance systems. ● Driver assistance systems are developed to support the driver and are not a replacement for the driver’s ● attention or action. Driver assistance systems are simply auxiliary instruments for the driver and do not replace applicable ●...

  • Page 6: Table Of Contents

    Table of Contents Trip planning Storage Check your car Placement areas Car settings Load compartment Interior lighting Vehicle unlocking Passenger compartment Smart key operation Mobile phone unlocking Front passenger compartment Emergency unlocking Rear passenger compartment Child seats Interaction with Driving control welcome lamp Sitting adjustment Safety control...
  • Page 7 Table of Contents Departure Arrive Driving functions Camera and recognition systems Leave the vehicle Driving Process Vehicle locking Low-speed driving Key locking Driving under special conditions Mobile phone locking Emergency locking Safe driving Vehicle charging Active safety Charging Intelligent recognition Power battery Passive Safety...
  • Page 8 Table of Contents Temporarily away from Familiar with your car the car Vehicle identification information Follow me headlamp Customer information Vehicle warning information Vehicle accessories Retrofit Vehicle maintenance System upgrade Fluid filling Parts replacement...

  • Page 9: Trip Planning

    Trip planning...

  • Page 11: Check Your Car

    PIN code. APP view If you bind a vehicle through the AIWAYS APP (hereinafter referred to as the "APP"). Before officially driving your car, you can check your car's status, such as state of charge, driving range, etc. on the "Car"...

  • Page 12: Car Settings

    The instrument has no warning lamp or fault information. ● You can also click Car-A/C on the APP to enter the air conditioning control interface and remotely turn on the air conditioner to ventilate or preheat the vehicle in advance to obtain a comfortable driving experience. AIWAYS...

  • Page 13: Vehicle Unlocking

    Vehicle unlocking...

  • Page 14: Smart Key Operation

    Vehicle unlocking ：When the vehicle is locked, short-press the button once to unlock the door, and the exterior door handle will unfold. You can set unlocking of the driver's door or four doors by clicking the central control AIWAYS...

  • Page 15: Mobile Phone Unlocking

    When your smart key is insufficient in power, your car may not be unlocked or locked normally. At this time, try to unlock/lock your car by means of its mechanical key, APP, etc., and please contact AIWAYS as soon as possible and replace the smart key.

  • Page 16: Emergency Unlocking

    AIWAYS...

  • Page 17: Interaction With Welcome Lamp

    Interaction with welcome lamp...

  • Page 18: Exterior Welcome Lamp

    30s, 45s, 60s, 75s, 90s) through the central control screen. After the greeting after unlock function is turned on, unlock your car with the key, and the headlamps and tail lamps will automatically light up, and the headlamps will continue to light up until the set time. PATH: Vehicle Settings - Lighting - Headlight AIWAYS...

  • Page 19: Storage

    Storage...

  • Page 20: Placement Areas

    Placement areas Front row storage The front row is equipped with various storage spaces for small items. 10 | AIWAYS...
  • Page 21 The storage box of center console is equipped with a cup holder, which will pop up automatically when the buckle is pushed upwards. Rear row storage The rear row is equipped with various storage spaces for small items. AIWAYS | 11...

  • Page 22: Load Compartment

    Load compartment Fold the rear seat backrest Pull up the control lock buttons on both sides of the backrest, release the seat lock, and push the seat backrest forward to fold; 12 | AIWAYS...
  • Page 23 When placing items that are easy to slide or roll, the items should be firmly fixed to avoid the bumps on the road during the driving process that cause the items to hit the inner wall of the carriage, causing damage to the items or vehicles. AIWAYS | 13...

  • Page 24: Interior Lighting

    Set the tailgate opening angle You can set the tailgate opening angle to open the tailgate in a low space. When the tailgate is opened, manually adjust the tailgate to the desired position. 14 | AIWAYS...
  • Page 25 Use the APP to control tailgate You can use the AIWAYS APP Car - Vehicle control - Doors interface to unlock and lock the tailgate.You need to log into the AIWAYS owner's account before operation. Make sure that your car is connected to the network.
  • Page 26 You can turn on/off ambient lamps, set the color mode of ambient lamps, and turn on the interactive mode through the panoramic control interface of the central control screen. 16 | AIWAYS...
  • Page 27 You can set the association reminder function of ambient lamps through the central control screen. The associated functions include: Interaction by Answering Call ● Charging Prompt ● Door Status Warning ● Collision Warning ● Thermal Runaway Warning ● Trunk lamp AIWAYS | 17...
  • Page 28 After the tailgate is opened, the trunk lamp illuminates automatically to provide light for your placement; after the tailgate is closed, the lamp goes out automatically. 18 | AIWAYS...

  • Page 29: Passenger Compartment

    Passenger compartment...

  • Page 30: Front Passenger Compartment

    Press and hold the button under the headrest, press the headrest down to the corresponding position, release the button, and when a "click" sound is heard, it indicates that the headrest is locked and fixed, and the headrest position adjustment is completed. 20 | AIWAYS...
  • Page 31 After that, you can use the wireless charging function to charge the mobile phone. The wireless charging panel is located at the lower middle of the instrument panel. The maximum output power of wireless charging is 15W. AIWAYS | 21...
  • Page 32 Only one mobile phone can be charged at a time. ● Front row charging port The front row of the vehicle is equipped with Type-A and Type-C charging ports to meet the charging needs of different devices. 22 | AIWAYS...
  • Page 33 1.Type-A charging port 2.Type-C charging port Sun-visor There are adjustable sunvisor equipped in front of the driver and front passenger’s seats respectively. 1. Sun-visor 2. Vanity mirror 3. Lighting lamp AIWAYS | 23...

  • Page 34: Rear Passenger Compartment

    The left, middle and right sides of the front instrument panel are equipped with A/C vents. Move the lever up, down, left and right to adjust the air outlet direction, and move it left or right to the stop position to close the vents. Rear passenger compartment Adjust the rear seat adjustment 24 | AIWAYS...
  • Page 35 Meanwhile, you should wear the seat belt correctly. If your seat posture is not right, it may cause serious consequences. Comfortable riding for rear passengers Rear row charging port The rear seats are equipped with Type-A port and Type-C port, which can be used by rear passengers to charge mobile devices. AIWAYS | 25...
  • Page 36 Rear row A/C vent The rear row is equipped with A/C vents. Move the lever up, down, left and right to adjust the air outlet direction, and move it left or right to the stop position to close the vents. 26 | AIWAYS...

  • Page 37: Child Seats

    Children younger than 12 years old ,or less than 1.5m,must use an appropriate child seat. Group 0 and 0+ child seats NOTE: Appropriate child safety seats along with correct use of seatbelts provide protection for your children! Rear-facing Group 0 or 0+ child seat, installed on rear outboard seat postion. AIWAYS | 27...
  • Page 38 Group 1 child safety seats WARNING: Appropriate child safety seats along with correct use of seatbelts provide protection for your children! Forward-facing Group 1 child seat,installed on the vehicle rear outboard seat position. 28 | AIWAYS...
  • Page 39 Appropriate child safety seats along with correct use of seatbelts provide protection for your children! Forward-facing Group 2 child seat, installed on the vehicle rear outboard seat position. Children weighing 15 kg to 25 kg and under 7 years old are recommended to use forward facing seats. AIWAYS | 29...
  • Page 40 The diagonal strap should rest on the child’s shoulder and chest, rather than be placed behind the back or below the arm. The lap belt should be tightly fastened across the child’s hips. 30 | AIWAYS...
  • Page 41 ● safety seat. A child safety seat must be positioned with the vehicle seat back in the upright position.The child seat ● is not allowed to be positioned with the vehicle seat back in a folded position. AIWAYS | 31...
  • Page 42 A used child safety system must be replaced after an accident. ● 32 | AIWAYS...
  • Page 43 PATH: VEHICLE Settings - Driving Settings - Passenger AIRBAG After the passenger seat airbag is enabled or disabled, the current passenger seat airbag status icon will be displayed at the lower right of the start bar of the center control panel. AIWAYS | 33...
  • Page 44 NOTE: The rear seats are the preferred place for children to sit with a child safety seat. ● All other airbags are still activated when the front passenger airbag has been deactivated. ● Installing a child seat 34 | AIWAYS...
  • Page 45 After installing the child safety seat in the rear seat,ensure the buckle is fully extended,and pull the seat belt across the child safety seat and buckle the seat belt.Make sure the seat belt is flat,not twisted,and securely fastened. ISOFIX/i-Size child seat fixation AIWAYS | 35...
  • Page 46 Pull the child safety seat forward to ensure it is fixed securely. For detailed installation instructions, please refer to the user guide that comes with the child safety seat. If required,ISOFIX anchorages can be retrofitted to the vehicle later.Please consult your nearest Aiways dealership for information.
  • Page 47 Group 2 15 kg to 25 kg Group 3 22 kg to 36 kg U: Suitable for universal category restraints approved for use in this weight group. ● UF: Suitable for front-facing universally approved child seats. ● AIWAYS | 37...
  • Page 48 Group III 22 kg to 36 kg U: Suitable for child seats that are universally approved in this weight group; ● X: The seating position is not suitable for child seats in this weight class. ● NOTE: 38 | AIWAYS...
  • Page 49 According to the type of child seats, the child seat can be fixed with ISOFIX or i-Size interface or seat ● belt. AIWAYS recommends using ISOFIX or i-Size as much as possible. Information about child restraint system installation suitability for various ISOFIX...
  • Page 50 In the process of installing the pull-up belt, you can dismantle the headrest if necessary, and remove the ● cover to make sure that the belt can be used smoothly. Recommended child safety seats We recommend the child safety seats: 40 | AIWAYS...
  • Page 51 Britax Römer King Ⅱ LS Britax Römer KidFix 2S Britax Römer KidFix 2S NOTE: If you can't buy Britax Römer Kidfix 2S, Aiways recommend to install Britax Römer KidFix i-Size. Maxi Cosi Cabriofix / Britax Römer King Ⅱ LS: Britax Römer KidFix 2S: AIWAYS...
  • Page 52 If there are children in the rear row during driving, open the child safety lock. At this time, the rear door cannot be opened from the inside to prevent accidents caused by children opening the rear door by mistake when playing in the car. 42 | AIWAYS...
  • Page 53 WARNING: When the rear door child safety lock is enabled, the corresponding rear door cannot be opened from inside. Please do not leave children in the car alone to avoid accidents. AIWAYS | 43...

  • Page 54: Driving Control

    Driving control...

  • Page 55: Sitting Adjustment

    Operate all the relevant adjustments to ensure a comfortable driving positon.The seat backrest should not be rotated forward beyond fully vertical.With the seat at mid fore/aft position,and fully down,the optimum seat back vertical position is with the headrest positioned inline with the B-pillar. AIWAYS | 45...
  • Page 56 Seat memory position:Short press to call memory of seat positon,long press to store memory. NOTE: Driver's seat memory function is turned on by default. ● Seat position memory can only save 3 positions, and if exceeding 3 positions, other stored positions ● need to be recovered. WARNING: 46 | AIWAYS...
  • Page 57 How to wear the seat belt correctly his vehicle is equipped with crotch-shoulder seat belts. Wear the seat belt correctly as follows: AIWAYS | 47...
  • Page 58 Pregnant women should wear their crotch-shoulder seat belts correctly and let the shoulder belt across the chest wherever appropriate; the crotch belt should pass through the crotch as low as possible and fit 48 | AIWAYS...
  • Page 59 The seat belt pretensioner can be used only once and must be replaced after triggered. Failure to replace the pretensioner in time will reduce the seat belt protection. If the seat belt pretensioner has been triggered, please contact AIWAYS as soon as possible to replace the seat belt pretensioner.

  • Page 60: Safety Control

    Check whether the seat belt OFF indicator can work properly. If any of the above checks have not passed, please contact AIWAYS immediately for troubleshooting. Seat belt maintenance Use neutral soap and warm water to clean the seat belt only. Never use any solvent to wash the seat belt.
  • Page 61 Automatic wiper function ：After the automatic wiper function is enabled, the rain and light sensor will work. The rain and light sensor will automatically turn on/off and adjust the wiper speed according to the rainfall intensity. Move the wiper sensitivity adjustment switch upward to improve the sensitivity in the AIWAYS | 51...
  • Page 62 NOTE: Ensure safety and you can open the windows to ease the fog. Interior and exterior rearview mirror regulator The exterior rearview mirror can be adjusted when the vehicle is powered on. 52 | AIWAYS...
  • Page 63 Vehicle mechanical status Steering wheel adjustment You can manually adjust the height and position of the steering wheel to suit your driving posture: Fully release the locking lever; AIWAYS | 53...
  • Page 64 Remove the sunvisor from the anchor and rotate it outward to block the side sunlight. WARNING: Do not use vanity mirror when driving. Window 54 | AIWAYS...
  • Page 65 You can also open or close the window through the panoramic control interface of the central control screen. Click the window contact on the model to activate the window adjustment Click on the model window to open or close the window. Window locking AIWAYS | 55...
  • Page 66 If the power windows are operated repeatedly and continuously in a short period of time, it may trigger ● the thermal protection of the system, have the electric opening and closing function disabled and let the 56 | AIWAYS...
  • Page 67 In your car, you can open the charging port cover, unlock or lock all doors and open or close the tailgate through the instrument interface of the central control screen. 1.Open the charging port cover 2.Unlock or lock doors 3.Open or close the tailgate AIWAYS | 57...
  • Page 68 Vehicle electronic status Steering wheel control 58 | AIWAYS...
  • Page 69 Panorma360 °, Mute) on the central control screen. PATH: System Settings - Controls of Steering Wheel Press the steering wheel buttons simultaneously for more than 5 seconds to restart the instrument and central control screen. Driving mode AIWAYS | 59...

  • Page 70: Vehicle Information

    The energy recovery is divided into three levels (High, Medium and Low), which can be selected according to your driving habit. Vehicle information Instruments Readings Auxiliary screen 60 | AIWAYS...
  • Page 71 2. Turn signal lamp 3. Vehicle-speed 4. Gear display When the navigation is enabled, the auxiliary screen displays the navigation information. Press the steering wheel button to switch the auxiliary screen display mode. Display area of central control screen AIWAYS | 61...
  • Page 72 4. Speedometer and driving mode 5. Scene display area 6. Function control button area display area Indicator and warning lamp If the following indicators or warning lamps do not light up or go out normally, please contact AIWAYS immediately for troubleshooting 62 | AIWAYS...
  • Page 73 Electronic parking brake Electronic parking brake fault activation indicator lamp warning lamp Braking system fault indi- Braking system fault indicator cator (ESP and Brake Assist (ESP and Brake Assist either fail at the same time) fail) AIWAYS | 63...
  • Page 74 Smart driving not activated in- dicator lamp dicator lamp Speed control function ac- Speed control function warning tivated indicator lamp lamp Speed control function Vehicle fault warning lamp turned on indicator lamp LDW activated indicator Vehicle fault warning lamp lampp 64 | AIWAYS...
  • Page 75 NOTE: The following pictures are only for illustration. Due to different software versions and vehicle configurations, the pictures may be inconsistent with the real vehicle. Please refer to the real vehicle. AIWAYS | 65...
  • Page 76 Click the "Edit" button to trigger edit status to customize the function. Long-press the icon to be replaced, drag it to the icon position in the control bar to replace it. 66 | AIWAYS...
  • Page 77 Operate the central control screen You can operate the central control screen differently through short press, long press, swipe and other actions. AIWAYS | 67...
  • Page 78 Switch the interface and call up the Swipe right with two fingers menu Touch with two fingers and unfold Zoom in Touch with two fingers and fold Zoom out NOTE: Some operations are only applicable in specific applications. 68 | AIWAYS...
  • Page 79 Carplay is a mobile phone and IVI intelligent interconnection application. The Carplay mobile phone and IVI interconnection function can map the map, music, phone, information and other applications in the mobile phone to the IVI screen, and support the addition of third-party audio applications. AIWAYS | 69...
  • Page 80 Connect the mobile phone and IVI through the front Type-C port, and authorize it on the mobile phone. After successful connection, you can use the Android Auto function. NOTE: The operation of Android Auto requires the smartphone system version to be Android 5. 0 or higher. ● 70 | AIWAYS...
  • Page 81 PATH: System Settings - Volume A/C control You can click the control bar button on the central control screen to enter the air conditioning control interface, and click it again to exit the air conditioning control interface. AIWAYS | 71...
  • Page 82 Air flows to the feet gear Air flows to the upper Air flows to the upper body body and feet Temperature synchroni- Air flows to the feet zation Front passenger seat Driver seat heating heating External circulation Internal circulation mode mode 72 | AIWAYS...
  • Page 83 Air-conditioning compressor switch: Click the “AC” icon to enable the air-conditioning compressor and you can use its refrigeration function. Click again to turn off the air-conditioning compressor and disable the refrigeration function; at this moment, it will keep the air vent direction unchanged and output natural air. Air flow direction AIWAYS | 73...
  • Page 84 In addition, you can click the icon in the custom air flow mode area to select the desired air flow direction. DAB+ radio Your car is equipped with a DAB radio system, which supports station search, frequency switching, radio collection, program selection and other operations. NOTE: DAB+ radio services are not available in all regions. 74 | AIWAYS...

  • Page 85: Departure

    Departure...

  • Page 86: Driving Functions

    After entering your car, close the doors, adjust your seat, steering wheel and the rearview mirrors, and fasten your seat belt and start your car: Press the brake pedal and power on your car, now, you can use the air conditioner and other electrical equipment; 76 | AIWAYS...
  • Page 87 Step on the brake pedal when the vehicle is stationary, pull up the EPB switch to enable the EPB. Step on the brake pedal when the vehicle is stationary, press the EPB switch to release the EPB. WARNING: AIWAYS | 77...
  • Page 88 When the low-voltage battery of your car is exhausted, the electronic parking function cannot be ● activated or released. Please contact AIWAYS at this time for troubleshooting. Manual emergency braking In case of emergency during driving, you can pull and hold the EPB switch for emergency braking.
  • Page 89 Do not take advantage of the extra convenience provided by the automatic parking function to drive at ● risk, so as to avoid accidents. Even if this car is equipped with automatic parking function, the driver must pay close attention to the surrounding conditions. AIWAYS | 79...

  • Page 90: Driving Process

    Driving Process...

  • Page 91: Low-Speed Driving

    The HHC system is only suitable as a starting assistant means in driving, and cannot replace parking ● brake. When the HHC system is working, the driver shall never leave his/her car; otherwise, serious safety ● accidents may occur. Hill Descent Control (HDC) AIWAYS | 81...

  • Page 92: Driving Under Special Conditions

    PATH: Vehicle Settings - Driving Settings - Driving Waring Driving under special conditions Driving on poor lighting roads 1.Light switch 2.Fog lamp switch ：Turn the knob to this position and your car will have its low beam lamp ON. 82 | AIWAYS...
  • Page 93 You can also adjust the headlamp height through the panoramic control interface of the central control screen Click the lamp contact on the model to activate the lamp adjustment.。 Drag the light from the model up and down to adjust the headlamp illumination height. AIWAYS | 83...
  • Page 94 To avoid tyre damage and excessive wear, the snow chains must be removed when driving on snow-free ● roads. CAUTION: Tire chains are not applicable to the original 20-inch tires of this vehicle. Temporary parking Hazard warning lamp 84 | AIWAYS...
  • Page 95 When it is necessary to warn the surrounding vehicles and pedestrians in case of emergency or dangerous situation, press the hazard warning lamp button on the headlining in time and the external lamp will flash continuously; press the hazard warning lamp button again and it will go out. AIWAYS | 85...

  • Page 96: Safe Driving

    Safe driving...

  • Page 97: Active Safety

    6.Left front millimeter-wave radar NOTE: After the vehicle collision, the sensor position of the driving assistance system may change, which may ● cause the system to fail to work normally. Please contact Aiways for maintenance as soon as possible. AIWAYS | 87...
  • Page 98 Repair or replacement of the driving assistance system sensors and their related components requires ● professional technicians and special equipment. Please contact Aiways for relevant operations. If the sensor of the driving assistance system is dirty or blocked, the instrument will display ●...
  • Page 99 Turn on/off intelligent speed limit assistance After the vehicle starts, press the "LIM" button on the steering wheel to turn on or off the intelligent speed limit assistance. When the intelligent speed limit assistance is turned on, the speed limit indicator lamp AIWAYS | 89...
  • Page 100 After the driver releases the accelerator pedal, the speed will slowly decrease below the maximum speed limit. When the speed limit reminder function is override, the vehicle will always be in a state of rapid acceleration. Please pay attention to the speed and drive carefully. 90 | AIWAYS...

  • Page 101: Intelligent Recognition

    If the system judges that you are currently in a fatigue driving state, the vehicle will send out corresponding text, voice and other reminders. AIWAYS | 91...
  • Page 102 You can turn on or off the in-car monitoring through the central control screen. After turning on the in-car monitoring function, the legacy monitoring function is turned on by default, and you can turn off the legacy monitoring function manually. PATH: Vehicle Settings - Camera 92 | AIWAYS...

  • Page 103: Passive Safety

    The activation of the emergency braking warning system shall meet the following conditions: The vehicle speed is greater than 50km/h ● A certain deceleration is met ● The anti-lock braking system (ABS) is activated ● AIWAYS | 93...
  • Page 104 Multi-Collision Braking System (MCB) 94 | AIWAYS...
  • Page 105 WARNING: ● If the airbag malfunction warning lamp lights up or flashes during driving, immediately contact your Aiways Service Partner for maintenance. The airbag system would not protect you in case of an accident. Important warnings on Airbag systems WARNING:...
  • Page 106 Never do any changes to the components of the airbag system or related components that may affect ● its normal operation. For related maintenance, please contact your Aiways Service Partner. The airbag system can only provide one-time accident protection. If the airbag has been triggered once, ●...
  • Page 107 1. High-speed frontal impact on a wall or vehicle 2. Impact on a hard surface 3. Falling into a deep trench 4. Side impact by a higher speed vehicle 5. Violently jump in the ground Airbags may not be triggered in the following situations: AIWAYS | 97...
  • Page 108 The airbag on the drivers’ side is located in the steering wheel, and the airbag on the front passenger side is located in the instrument panel on the front passenger side. The airbags’ location is marked with “Airbag.” 98 | AIWAYS...
  • Page 109 PATH: Vehicle Settings – Driver Settings– Passenger AIRBAG WARNING: For the driver and front passenger,it is advised to be a minimum of 25cm from the front airbags,to ensure that the airbags function properly and do not cause serious injury. Side airbags AIWAYS | 99...
  • Page 110 “airbag”.They provide additional protection to the upper body in the event of a side collision. WARNING: Non-approved Aiways seat covers may obstruct the side airbag deployment.If you find that the original seat cover is damaged,you must immediately contact Aiways for maintenance.Only use Aiways approved seat covers.
  • Page 111 Hazard warning lamps will be switched on to indicate the vehicle position and warn oncoming vehicles, ● and turn on the reading lamps in the car to facilitate night-time rescue. The high-voltage power supply will be cut off to protect personal safety. ● AIWAYS | 101...
  • Page 112 100m ~ 200m away from the rear of the lane where the vehicle is located, face the direction of the oncoming vehicle and warn the vehicles behind to avoid in time. Remote assistance 102 | AIWAYS...
  • Page 113 If you touch the SOS button and the ON-CALL button by mistake, you can press the button again to ● hang up the voice call before establishing the call. When the emergency call function fails, the SOS button light will flash. Please contact AIWAYS for ● maintenance.
  • Page 114 Your car is equipped with a smart charge function. When the low voltage battery is low, the vehicle's power battery will start to charge the low voltage battery. If the low voltage battery often suffers from abnormal power shortage, please immediately contact AIWAYS for maintenance. 104 |...
  • Page 115 Place the wheel choke ①, place the anti-slip rubber pad ② around the tyre, install the tether belt ③ around the tyre and fix it on the tow vehicle, and tighten the belt to secure the vehicle. AIWAYS | 105...
  • Page 116 The mechanical opening device is located at the tailgate latch. Open the trim plate of the mechanical opening device in the trunk, and push the lever to the right to unlock the tailgate, so as to push the tailgate and escape from the car. 106 | AIWAYS...
  • Page 117 The vehicle's automatic braking capacity is limited under the control of ACC, and the driver still needs ● to focus on observing the road and traffic conditions. When the driver feels an imminent danger, he/she should actively step on the brake pedal to take over the vehicle manually. AIWAYS | 107...
  • Page 118 Do not leave the vehicle when the vehicle is stationary under the control of ACC. If you need to leave, make sure that the electronic parking brake is pulled and the gear is in the parking position. You can only leave the vehicle after it is powered off. 108 | AIWAYS...
  • Page 119 1 km/h each time. After releasing the button, the adjustment and setting of the cruise target speed will be completed. ACC following distance adjustment AIWAYS | 109...
  • Page 120 ACC recovery After ACC is switched from the active state to the standby state, ACC can be resumed by pressing the button. At this time, the cruise icon on the instrument lights up, and the restored target speed 110 | AIWAYS...
  • Page 121 The target vehicle is a vehicle running at low speed; ● Irregular target vehicles that cannot be effectively identified due to abnormal contour caused by ● loading; Vehicles ahead with high chassis on the same lane (such as trucks); ● AIWAYS | 111...
  • Page 122 When the vehicle turns at intersections, follows vehicles to pull into, out of curves or sharp turns; ● When the vehicle does not fully pull into or pull out of the current lane in the process of lane change of ● the vehicle ahead; When the vehicle drives on a steep slope; ● 112 | AIWAYS...
  • Page 123 The driver's hands are off the steering wheel for a long time, and still fails to take over the steering ● wheel after being prompted by the system; In the process of steering interference applied by the vehicle, the driver reversely overcomes the lateral ● control; AIWAYS | 113...
  • Page 124 Enable SCC When the vehicle starts and the conditions for activating SCC are met, the driver can activate the SCC by short-pressing the intelligent driver assistance button on the left side of the steering wheel 114 | AIWAYS...
  • Page 125 CAUTION: Due to traffic and weather, the range of optional intervals may not be suitable for all drivers and driving conditions. AIWAYS | 115...
  • Page 126 After SCC is activated, when the driver steps on the accelerator pedal and the instrument prompts "Driver steps on the accelerator, SCC cannot decelerate", SCC will enter the override state, the speed of the vehicle will temporarily increase, and the cruise will temporarily quit work. When the driver releases the 116 | AIWAYS...
  • Page 127 When the speed drops to the maximum speed allowed for cornering, the lateral control of super cruise will be restored and the speed will remain unchanged. In cornering, super cruise will adjust the speed in real time according to the curve radius. ● AIWAYS | 117...
  • Page 128 The driver's hands are off the steering wheel; ● Dial the turn signal lamps; ● Turn the steering wheel beyond SCC; ● Turn on the hazard warning light; ● The radius of passing through the curve is too small; ● 118 | AIWAYS...
  • Page 129 Please set the FCW function in an environment where the vehicle is stationary and safety is ensured. ● The FCW function is a driver assistance function and it only provides warning for dangerous conditions. ● The driver shall be responsible for the safety of all driving behaviors. Even if the FCW function is AIWAYS | 119...
  • Page 130 The autonomous emergency braking function in the speed range of 10-120km/h can identify the front ● vehicle or stationary vehicle traveling in the same direction, and control the vehicle to brake or stop when there is a collision risk. 120 | AIWAYS...
  • Page 131 When the switch is set to "Warning + Automatic Braking", the automatic emergency braking function is enabled. PATH: Vehicle Settings - Advanced Drive Assistance Service - Forward Collision Warning AIWAYS | 121...
  • Page 132 The detection performance of the front centering radar or front-view camera is affected; ● When driving in rain and snow, the contour of the vehicle ahead is not clearly identified due to the rain ● and mud splashed by the wheels of the vehicle ahead or the surrounding vehicles; 122 | AIWAYS...
  • Page 133 The SMW is only a driver assistance function and cannot replace the driver to drive. The driver should be responsible for the safety of all driving behaviors. Please drive carefully and always observe the road conditions and keep a safe distance from vehicles and pedestrians. AIWAYS | 123...
  • Page 134 The vehicle is driving on a road that is too wide, too narrow or with sharp turns; ● The vehicle has just entered a section with lane lines or a section without lane lines; ● The driver actively activates the turn signal lamps or hazard warning lamps; ● 124 | AIWAYS...
  • Page 135 When the system detects that the vehicle has a tendency to deviate from the lane center line, it will actively intervene in steering and make the vehicle return to the lane center area. AIWAYS | 125...
  • Page 136 It is recommended to turn off this function when vehicles pass through poor road sections or road construction sites. Severe weather conditions such as rain, snow, smoke, hail, sand, and backlight will affect the stability ● of the LKA function. It is not recommended to use the LKA function in severe weather. 126 | AIWAYS...
  • Page 137 AIWAYS | 127...
  • Page 138 The types of light sources that can be recognized by the IHBC function include halogen lamps, LED lamps, and xenon lamps; the types of light positions that can be recognized include the high beam, tail lamps of conventional vehicles, front head lamps of bicycles, two-wheeled electric vehicles, and motorcycles. 128 | AIWAYS...
  • Page 139 NOTE: The speed value on the traffic sign identification icon shall be subject to the actual road sign, which is only for reference. Identifiable road signs AIWAYS | 129...
  • Page 140 The system can't distinguish the accurate direction for the signs with no clear direction to the object at the display position, and the signs with no clear direction at the display position include but are not limited to: 130 | AIWAYS...
  • Page 141 The driver should not only rely on the BSD function to remind himself/herself that objects or vehicles appear near the blind spot or side. Many external factors will reduce the performance of BSD. AIWAYS | 131...
  • Page 142 132 | AIWAYS...
  • Page 143 When the vehicle gear is switched to reverse gear, parking gear or the driving speed of vehicle is lower ● than 15km/h, the lane change warning function will be automatically turned off. One of the following conditions may cause failed radar identification and poor LCW performance, including but not limited to: AIWAYS | 133...
  • Page 144 CLC function can control the vehicle to change a lane automatically. 134 | AIWAYS...
  • Page 145 You can turn on or off the CLC function through the central control screen. PATH: Vehicle Settings - Adwanced Drive Assistance Service - Lane Change Assist AIWAYS | 135...
  • Page 146 Then, the corresponding exterior rear-view mirror indicator light will flash and an audible alarm is given to alert the driver or passenger to pay attention to the vehicle coming from behind and open the door carefully. 136 | AIWAYS...
  • Page 147 You must confirm the safety of the surrounding environment before you open the door to get off; otherwise, it may cause personal injuries and other safety incidents. One of the following conditions may cause failed radar identification and poor DOW performance, including but not limited to: AIWAYS | 137...
  • Page 148 You can turn on the Forward Collision Warning (FCW) through the central control screen. If the FCW is turned on, the FCTA activates. PATH: Vehicle Settings - Advanced Drive Assistance Service - Forward Collision Warning CAUTION: 138 | AIWAYS...
  • Page 149 When it is detected that a vehicle enters the blind spot, resulting in a risk of collision, the warning light of the corresponding exterior rear-view mirror will flash and an audible alarm be given. Meanwhile, the instrument panel displays the warning information to alert you, so as to reduce the risk of collision. AIWAYS | 139...
  • Page 150 Working conditions of RCTA: Shifted to R (Reverse); ● Target vehicle crossing behind your vehicle at 30km/h and below; ● Expected collision time less than 3 seconds. ● 140 | AIWAYS...
  • Page 151 The radar performance may be affected under extreme weather conditions such as rain, snow, fog , ● haze and so on; False alarms may be given for some metal protective fences, tree lawns and cement walls in a certain ● circumstance as the radar is limited to identify targets. AIWAYS | 141...

  • Page 152: Arrive

    Arrive...

  • Page 153: Camera And Recognition

    Turn signal lights activates AVM: Turn on the left/right turn signal lights to activate the AVM and display ● the field of view on the corresponding side. Activation of obstacles: The AVM activates automatically when obstacles are sensed around your ● vehicle. PATH: Vehicle Settings - AI Parking - Panoramic Display AIWAYS | 143...
  • Page 154 Click to view the left and right views of the rear wheels. Click to view the left and right views of the four wheels. Auto Parking Assist（APA） 144 | AIWAYS...
  • Page 155 APA. Shift to D and let the vehicle drive slowly. The APA starts to search for a parking space, with the available parking spaces displayed on the instrument panel. AIWAYS | 145...
  • Page 156 Click the target parking space. It will turn green if it is selected. Release the brake pedal and the steering wheel according to the prompts on the central control screen. Then, your vehicle starts to park automatically. 146 | AIWAYS...
  • Page 157 APA. Select the direction to drive out of a parking space. The available direction will be displayed in a blue box on the instrument panel. AIWAYS | 147...
  • Page 158 Click the desired direction blue box or rotate the turn signal paddle to the desired direction, and then release both the brake pedal and the steering wheel according to the prompts on the central control screen to allow the vehicle to drive out of the parking space automatically. 148 | AIWAYS...
  • Page 159 The APA may fail to function properly if one of the following conditions occurs. Please be careful and be ready to take over the vehicle manually at all times: The road surface is inclined and uneven (as the APA is only designed and developed for level roads). ● AIWAYS | 149...

  • Page 160: Leave The Vehicle

    You can activate the alarm voice of the ultrasonic sensors on the central control screen, and set the detection sensitivity of the ultrasonic sensors (Low, Medium, or High). PATH: Vehicle Settings - AI Parking - Radar Warning Tone Leave the vehicle Power off 150 | AIWAYS...
  • Page 161 The Automatic Power-off function has been enabled ● The vehicle is not set in the OTA (Over-the-Air) state ● All the doors are closed but the key is left in the vehicle ● The vehicle is stationary and shifted to P ● AIWAYS | 151...
  • Page 162 To protect the service life of LV battery, do not use onboard electrical appliances for a long time when the power mode is OFF. Emergency power-off Press the hazard warning lamp button and hold it there for 6s to power off in an emergency. CALL 152 | AIWAYS...

  • Page 163: Vehicle Locking

    Vehicle locking...

  • Page 164: Key Locking

    Mobile phone locking Locking the vehicle with the APP When you are far away from the vehicle, you can use the APP Car - Vehicle control interface or the Bluetooth key to lock the doors remotely. 154 | AIWAYS...

  • Page 165: Emergency Locking

    Pull the exterior door handle, insert the mechanical key, and rotate it clockwise to complete the locking. NOTE: Before locking, make sure that all doors are closed. ● The mechanical key is integrated into the smart key, and please refer to the chapter "Mechanical ● Unlock" for the removal method. AIWAYS | 155...

  • Page 166: Vehicle Charging

    Vehicle charging...

  • Page 167: Charging

    When the ambient temperature is too high or too low, the charging time will become longer due to the need to cool or heat the power battery (the capacity of the power battery will be affected when the vehicle is in a low temperature environment for a long time). AIWAYS | 157...
  • Page 168 If any abnormality is found, please do not perform charging operation, and contact AIWAYS for maintenance in time, otherwise it may cause the vehicle charging failure or the charging equipment damage, and personal injury in serious cases.
  • Page 169 If the charging fails, try to charge your vehicle on another charging pile. If the charging still fails, please contact your authorized repair shop immediately; AIWAYS | 159...
  • Page 170 APP and the IVI. Checking with the mobile phone: View through the APP-Car interface. ● ● Checking with the IVI: Click the icon of the instrument control bar to pop up the "Battery Maintainer" interface to view. 160 | AIWAYS...
  • Page 171 Charging plug meet 62196-2 IEC 2010 SHEET 2-IIb and SAE J1772-2010 standards. ● Product assembly meet IEC61851-12010 charging mode 3 connection method. ● Excellent protection performance, protection grade IP55 when in operation. ● Attractive appearance, hand-held ergonomic design, easy-to-use plug. ● AIWAYS | 161...
  • Page 172 Just plug in and start charging. IP55 waterproof ● Leakage protection ● Overheating protection ● Flame resistance ● Lightning-proof ● Overcurrent protection ● Overvoltage protection ● Features Input：220 V AC 50/60 HZ ● Output：220 V AC 16 Amps 50/60 HZ ● 162 | AIWAYS...
  • Page 173 "charge gun connected", then the blue charging indicator blinks , indicating that the vehicle is charging. AIWAYS | 163...

  • Page 174: Power Battery

    Use and maintenance of power battery The performance of the power battery is related to the ambient temperature. The optimal working temperature range is 5°C ~ 35°C, and the maximum working temperature range is -30°C ~ 55°C. To 164 | AIWAYS...
  • Page 175 In the event of a collision: The vehicle control system will power off the high-voltage system, the power ready status indicator ● lamp will go out, and the vehicle cannot continue to drive, please contact AIWAYS immediately. AIWAYS | 165...
  • Page 176 If the power battery of the vehicle fails, please pay attention to the status of the vehicle and instruments in time, and carry out a slow charging operation on the vehicle or repair and maintain the nearest AIWAYS service outlet according to the prompt requirements of the pop-up window on the central control screen.
  • Page 177 E-Call function will take the initiative to make an emergency call and get in touch with AIWAYS Customer Service Center. The specialist of the Customer Service Center will give professional guidance and arrange rescue.
  • Page 178 Be sure to handle in accordance with the information or requirements below. For details about the recycling and disposal of power batteries, please refer to the official Aiways website. Personnel requirements: The disassembly operation of power batteries must be performed by professionals qualified by the power battery supplier.

  • Page 179: Temporarily Away From The Car

    Temporarily away from the car...

  • Page 180: Follow Me Headlamp

    You can turn off the "Greeting After Unlock" function and set the time of lighting headlamps (15s, 30s, 45s, 60s, 75s, 90s) on the central control screen. PATH: Vehicle Settings - Lighting - Headlight 170 | AIWAYS...

  • Page 181: Vehicle Accessories

    Vehicle accessories...

  • Page 182: Retrofit

    WARNING: If you carry out the retrofitting operation in a third party without the authorization of AIWAYS, which has an impact on the performance of the vehicle, resulting in unexpected consequences, AIWAYS will not bear any responsibility.

  • Page 183: Vehicle Maintenance

    Vehicle maintenance...

  • Page 184: System Upgrade

    Please wait patiently. If the software update process fails to complete normally or the vehicle becomes abnormal after the update, please immediately contact AIWAYS for maintenance. You can check the status of vehicle software version and upgrade the software on the central control screen.
  • Page 185 Before closing the front compartment cover, ensure that there are no obstacles in the closed area of the ● front compartment cover. Before driving, make sure that the engine hood is fully closed and locked. ● Fluid filling Add the windshield washing liquid AIWAYS | 175...
  • Page 186 Open the front compartment cover. Open the lid of the washing liquid pot and add the windshield washing liquid. CAUTION: Do not use the washer without washing liquid in the reservoir in order not to damage the washer. Add the coolant 176 | AIWAYS...
  • Page 187 If the brake fluid level is lower than the minimum liquid level (MIN) of the fluid reservoir, do not drive ● the vehicle. If the brake fluid drops obviously and the braking system may fail, please contact Aiways for inspection.

  • Page 188: Parts Replacement

    The tyre pressure tag is located on the door frame of the driver's side door, and the tyre pressure tag has the recommended tyre pressure specification information. 178 | AIWAYS...
  • Page 189 When tire pressure is abnormal and an alarm is given, inflate or deflate the tires to the standard tire ● pressure, and then drive the vehicle at low speed for at least 1 minute to make the tire pressure alarm return to normal. AIWAYS | 179...
  • Page 190 For your driving safety, please check the tyres regularly. Check the tyre for puncture, bulges, and other damage, remove foreign matters embedded in the tyre tread; check whether the tyre is worn to the wear mark, and replace the tyre immediately if necessary. CAUTION: 180 | AIWAYS...
  • Page 191 Open "Wiper Service Mode" through the central control screen, and the wiper blade automatically moves to the maintenance position; PATH: Vehicle Settings - Servicing and Safety - Wiper Service Mode Lift the wiper arm away from the front windshield; AIWAYS | 181...
  • Page 192 Put the connector on the new wiper blade into the slot of the wiper arm; Push the wiper blade toward the wiper arm until the wiper blade is fully embedded, and ensure that the wiper blade is properly fixed on the wiper arm; 182 | AIWAYS...
  • Page 193 NOTE: After disconnecting and reconnecting the low voltage battery, the one-button lifting and anti-pinch function of the window may fail. You can perform the initialization operation to restore the relevant functions. Fuse information Fuse position AIWAYS | 183...
  • Page 194 NOTE: All fuses need to be operated by professional technicians, and it is recommended to be handled by ● Aiways. Only fuses of the same capacity and model can be used for replacement. The detailed information is ● subject to the actual equipment of your vehicle.
  • Page 195 For the safety and technical expertise, it is recommended that you complete maintenance operations at an authorized service outlet of AIWAYS. Toxic liquid Liquids used in vehicles are harmful to human body and must not be swallowed or come into contact with unhealed wounds.
  • Page 196 When driving, it is recommended to press the brake pedal several times to remove the water stains under the condition of safe driving. Do not wash the electrical components and connectors inside the chassis or front compartment directly ● or indirectly. 186 | AIWAYS...

  • Page 197: Familiar With Your Car

    Familiar with your car...

  • Page 198: Vehicle Identification

    5. Sheet-metal of the inner panel on the trunk lid 6. Right damper base (on the right side) 7. Nameplate below the sheet-metal of the outer 8. Rear-right door inner sheet-metal panel of right B-pillar Vehicle mass parameters 188 | AIWAYS...
  • Page 199 1880 (without outside rearview Physical dimensions Width (mm) mirror) Height (mm) 1641（with shark fin antenna) Front wheel track (mm) 1594 Track width Rear wheel track (mm) 1594 Wheelbase (mm) 2800 Front suspension (mm) Rear suspension (mm) 1017 AIWAYS | 189...
  • Page 200 JX6481UBEV Model of drive motor TZ220XS004 Motor type Three-phase permanent magnet synchronous motor Rated power/peak power (kW) 65/160 Rated speed/peak speed (r/min) 4500/16000 Rated torque/peak torque (N*m) 145/315 Driving type Front-mounted front drive Degree of protection IP67 190 | AIWAYS...
  • Page 201 Maximum design speed (km/h) Maximum gradient (%) Pass performance parameters Item Value Minimum turning diameter (m) Load Full load no load Approaching angle 14.2° 15° Departure angle 20.5° 24° Minimum ground clearance (full load) (mm) Braking system parameters AIWAYS | 191...
  • Page 202 Reasonable range of free travel of brake pedal 5–10 (mm) Breaking-in period of brake performance of new ve- 1,500 hicle (km) Breaking-in period of brake performance after re- placing brake discs or brake pads (km) Wheel alignment parameters 192 | AIWAYS...

  • Page 203: Customer Information

    Radio transmission systems This vehicle has systems that transmit and/or receive radio waves subject to Directive 2014/53/EU. The full text of the EU declaration of conformity for each system is available at the following internet address: www.ai-ways.eu. AIWAYS | 193...
  • Page 204 Importer is: AIWAYS. ● REACH Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) is a European Union regulation adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals. Visit www.ai-ways.eu for further information and for access to the Article 33 communication.
  • Page 205 VIN, speed, direction and location. The data is stored by the vehicle and may be accessed, used and stored by Aiways service technicians during vehicle servicing, or periodically transmitted to Aiways wirelessly through the vehicle’s telematics system.
  • Page 206 Aiways vehicles. Although Aiways shares this data with partners, your identification would not be disclosed in this data and only can be sent to Aiways after your explicit consent. In order to protect your privacy, your personal information is either limited to be accessed by privacy preserving techniques, or is removed from any report before being sent.
  • Page 207 Quality Control A few driving mileage may display on the odometer when you take delivery of your U6. This is a result of a comprehensive testing that ensures the quality of your U6. The testing includes extensive inspections during and after production. The final inspection takes place at Aiways, which includes a road test conducted by a technician.
  • Page 208 Personal data may be used to provide online services. Data exchange for this purpose takes place via a protected connection, e.g. using the manufacturer's IT systems provided for the purpose. Collection, processing and use of personal data for the purposes of 198 | AIWAYS...
  • Page 209 Identification (RFID) RFID technology is used in some vehicles for functions such as tyre pressure monitoring and immobilising. It is also used to provide functions of convenience, such as controlling door locking/unlocking and starting of the vehicle remotely. AIWAYS | 199...

  • Page 210: Vehicle Warning Information

    Vehicle warning information Warning sign information High voltage hazard warning signs and high voltage component signs (all orange components are high voltage components) High voltage component warning sign 200 | AIWAYS...
  • Page 211 Label for deactivated front passenger Airbag when using child safety seat Power battery warning sign Li-ion AIWAYS | 201...

Table of Contents