Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for turck IMX12-CCM05 Series
Summary of Contents for turck IMX12-CCM05 Series
- Page 1 Your Global Automation Partner IMX12-CCM05… Cabinet Guard Instructions for Use...
-
Page 2: Table Of Contents
14 Disposal.............................. 15 15 Technical data........................... 16 16 Appendix: Approvals and markings..................... 17 17 Turck subsidiaries — contact information.................. 18 V01.01 | 2023/03 | 2 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 3: About These Instructions
If you have any suggestions for improving the design or if some information is missing in the document, please send your suggestions to techdoc@turck.com. V01.01 | 2023/03 | 3 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 4: Notes On The Product
Cabinet guard Quick Start Guide Adhesive foil (Target) for attaching reflective surfaces Turck service Turck supports you with your projects, from initial analysis to the commissioning of your applic- ation. The Turck product database under www.turck.com contains software tools for program- ming, configuration or commissioning, data sheets and CAD files in numerous export formats. -
Page 5: For Your Safety
The product is designed according to state-of-the-art technology. However, residual risks still exist. Observe the following warnings and safety notices to prevent damage to persons and property. Turck accepts no liability for damage caused by failure to observe these warning and safety notices. -
Page 6: Product Description
Dimensions – IMX12-CCM05… 37.5 [1.48] 110 [4.33] 131.8 [5.19] 120 [4.72] 125.7 [4.95] 12.5 [0.49] mm [Inch] fig. 4: Dimensions – IMX12-CCM05…CC V01.01 | 2023/03 | 6 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 7: Indication Elements
The devices can be parameterized via a teach-in function and the HART interface. Potential-free switching contacts, such as REED sensors, can be connected to the device via a digital input. V01.01 | 2023/03 | 7 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 8: Installing
„ Observe a minimum clearance of 40 mm between the housing front and control cabinet door. fig. 5: DIN rail mounting V01.01 | 2023/03 | 8 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 9: Connection
Tighten screws. The max. tightening torque is 0.5 Nm. 0.2…2.5 mm (24…13 AWG) 7 mm 0.5 Nm (4.43 LBS-inc) fig. 6: Connecting devices with screw terminals V01.01 | 2023/03 | 9 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 10: Connecting Devices With Spring-Loaded Terminals
16 – [mm] 11 + 12 – ≤ 30 VDC ≤ 100 mA 6 – 10 – fig. 8: IMX12-CCM05… wiring diagram V01.01 | 2023/03 | 10 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 11: Commissioning
NOTE Turck recommends that the short circuit monitoring is deactivated when the device is supplied by a DCS/PLC card. V01.01 | 2023/03 | 11 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 12: Operation
SV unit code Unit in % Value for relative air humidity Distance TV unit code Unit in mm Distance value V01.01 | 2023/03 | 12 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 13: Setting
Max. number of limit value overshoots before notification (door gap) Type of switching outputs Hysteresis for temperature/humidity/door gap Automatic limit value calculation Manual calibration process Possible V01.01 | 2023/03 | 13 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 14: Troubleshooting
If there are no faults, there is a device malfunction. In this case, decommission the device and replace it with a new device of the same type. V01.01 | 2023/03 | 14 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 15: Maintenance
Observe our return acceptance conditions when returning the device to Turck. 12.1 Returning devices Returns to Turck can only be accepted if the device has been equipped with a Decontamination declaration enclosed. The decontamination declaration can be downloaded from https://www.turck.de/en/retoure-service-6079.php and must be completely filled in, and affixed securely and weather-proof to the outside of the packaging. -
Page 16: Technical Data
Acc. to EN 61000-4-2/-3/-4/-5/-6/-8, acc. to NAMUR NE21 MTBF at 20 °C 358 years MTBF at 40 °C 154 years V01.01 | 2023/03 | 16 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 17: Appendix: Approvals And Markings
É II 2 G Ex ib op is IIC T4 Gb CML 21UKEX21126 IECEx IBE 16.0007 Ex ib op is IIC T4 Gb Ambient temperature T : -25…+70 °C V01.01 | 2023/03 | 17 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... -
Page 18: Turck Subsidiaries - Contact Information
Via San Domenico 5, IT-20008 Bareggio (MI) www.turckbanner.it Japan TURCK Japan Corporation ISM Akihabara 1F, 1-24-2, Taito, Taito-ku, 110-0016 Tokyo www.turck.jp V01.01 | 2023/03 | 18 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com... - Page 19 Inönü mah. Kayisdagi c., Yesil Konak Evleri No: 178, A Blok D:4, 34755 Kadiköy/ Istanbul www.turck.com.tr Turck Inc. 3000 Campus Drive, USA-MN 55441 Minneapolis www.turck.us V01.01 | 2023/03 | 19 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com...
- Page 20 Over 30 subsidiaries and 60 representations worldwide! 100037995 | 2023/03 100037995 www.turck.com...
Need help?
Do you have a question about the IMX12-CCM05 Series and is the answer not in the manual?
Questions and answers