Eaton xStorage Home 3P User Interface Manual
Hide thumbs
Also See for xStorage Home 3P:
- User manual (32 pages) ,
- Instruction manual (62 pages) ,
- User manual (60 pages)
Subscribe to Our Youtube Channel
Related Manuals for Eaton xStorage Home 3P
Summary of Contents for Eaton xStorage Home 3P
- Page 1 Home 3P xStorage Home 3P User interface display manual This document is intended for Eaton certified installers...
- Page 2 Corporation’s (“Eaton”) experience and judgment and may not cover all contingencies. If further information is required, an Eaton sales office should be consulted. Sale of the product shown in this literature is subject to the terms and conditions outlined in appropriate Eaton selling policies or other contractual agreement between Eaton and the purchaser.
-
Page 3: Table Of Contents
EN 50549-1 menu ............. . 38 XSTORAGE HOME 3P USER INTERFACE DISPLAY MANUAL MN700010EN October 2020 www.eaton.com... - Page 4 User Registration ............. . 46 XSTORAGE HOME 3P USER INTERFACE DISPLAY MANUAL MN700010EN October 2020 www.eaton.com...
-
Page 5: Introduction
While every care has been taken to ensure the accuracy of the information contained in this manual, Eaton assumes no liability for any error or omission. Eaton reserves the right to modify the designs of its products. The unauthorized copying and lending of this manual is prohibited. -
Page 6: Field Of Applications
1.1 Field of Applications This manual is intended for Eaton certified installers. It describes how to securely install and commission the following Eaton xStorage Home three phase (3P) hybrid inverters (table 1): Table 1. xStorage Home 3P system overview Eaton xStorage Home 3P... -
Page 7: Mandatory Action Symbols
1.2.3 Mandatory action symbols Read the instructions. These instructions are intended for Eaton certified installers. The Eaton certified installer must be an expert in the field and must therefore be responsible for commissioning the system according to the manufacturer’s instructions and local legislation. -
Page 8: Conventions Used In This Document
1.3 Conventions used in this document This manual adopts the following type conventions and acronyms to refer to Eaton xStorage Home system or its parts: Screen type represents information that appears on the screen or LCD display (used to indicate screen •... -
Page 9: Caution
It is strictly prohibited to open the xStorage Home 3P system except as listed in this manual. The installation of the equipment must not be carried out by personnel who are not Eaton certified installers, or professionals under the influence of alcohol or drugs, or people with have prosthetic heart valves or pacemakers. -
Page 10: Operating Environment And Restrictions
The xStorage Home 3P system can only be used with photovoltaic modules that do not require the earthing of one of the poles. xStorage Home 3P can only be used with photovoltaic modules that meet the specific requirements of class A in accordance with the indications of the IEC 61730 standard. Do not connect any other energy source to the inverters in addition to the modules described above. -
Page 11: Suggested Protections During The Installation
70 kPa to 106 kPa. The xStorage Home 3P system must be used at a maximum altitude above sea level of 3000 m (9750 feet). For altitudes above 2000 m, due to the rarefaction of the air, specific conditions may occur which must be considered when choosing the place of installation. -
Page 12: Protection From Electric Shock
Home 3P installation manual. Connect to ground the xStorage Home 3P external frame or other conductive parts to ensure best protection to the system and best safe to the operators. -
Page 13: Ip Protection Class Rating
Connect to ground the xStorage Home 3P external frame or other conductive parts to ensure best protection to the system and best safety to the operators. National standards related to grounding must be complied with. 2.5 IP Protection class rating IP21 Housing protected from access of solid objects larger than 12.5 mm. -
Page 14: Control Panel
LED off: the xStorage Home 3P is not powered. • 2. General alarm LED on: the xStorage Home 3P has detected a fault. The LCD display activates the corresponding alarm • icon and shows the information related to the alarm occurred on the status bar (See the “Troubleshooting”... -
Page 15: Dashboard"Page
Figure 2. Dashboard from the xStorage Home 3P display The dashboard screen displays and analyzes in real time all parts of the xStorage Home 3P system. All the power sources supplied to meet the demand of the domestic needs and their operating parameters are constantly monitored and displayed in real time. - Page 16 “GENERAL ALARM” icon. If this icon is on, the system has detected a fault. The code of the alarm detected by the system is displayed on the system status bar. Please refer to the troubleshooting section of xStorage Home 3P installation manual.
-
Page 17: System Programming
Many of the information and settings available from the menu are relevant for maintenance, diagnostics and installation. Due to continuous improvement it is possible that changes will be implemented in the future. Figure 3. The overall structure of the menu available from the xStorage Home 3P display ... -
Page 18: Main Menu
4.2 Main menu Figure 4. The main menu page from the xStorage Home 3P display The main menu is composed by: Number Description “DASHBOARD” key. By pressing this key, the dashboard screen is displayed. “BACK” key. By pressing this key, the previous page is reloaded. -
Page 19: Login/Logout Menu
Figure 5. Login page for Eaton certified installers available from the xStorage Home 3P display The login page for Eaton certified installers that provides access to advanced installer settings, is composed by: Number Description Numeric keypad to enter the ID password. -
Page 20: Charts Menu
4.4 Charts menu The charts menu enables the Eaton certified installer and end-users to access the data stored in the local memory and user interface. The information and settings available from the menu are also relevant for maintenance and diagnostics. -
Page 21: 24H" Chart
“24h” Chart Figure 7. Day chart from the xStorage Home 3P display The 24 hours chart available from the xStorage Home 3P display is composed by: Number Description “CHART SELECTION” key. Press this key to select the different charts (24 hours 7 days 12 months). -
Page 22: 12M" Chart
4.4.3 “12m” Chart Figure 9. Year chart from the xStorage Home 3P display The 12 months chart available from the xStorage Home 3P display is composed by: Number Description “CHART SELECTION” key. Press this key to select the different charts (24 hours 7 days 12 months). -
Page 23: Info Menu
4.5 Info menu The “INFO” menu provides access to general information about the xStorage Home 3P. The data available from the menu are relevant for maintenance and diagnostics. Due to continuous improvement it is possible that changes will be implemented in the future. - Page 24 Network Gateway SSID Wi-Fi network ID accessed by the inverter IP Address IP address assigned to the inverter within the local network WLAN Netmask Network Subnet mask Gateway Network Gateway XSTORAGE HOME 3P USER INTERFACE DISPLAY MANUAL MN700010EN October 2020 www.eaton.com...
-
Page 25: Export Menu
Connect the external USB memory stick before performing the export procedure. The external USB memory stick must be large enough and must have at least 128 Mb of free space. XSTORAGE HOME 3P USER INTERFACE DISPLAY MANUAL MN700010EN October 2020 www.eaton.com... -
Page 26: Setting Menu
4.7 Setting menu The “SETTINGS” menu provides access to all settings relevant to the installation of the xStorage Home 3P. The data and and settings available from the menu are relevant for maintenance and installation. Due to continuous improvement it is possible that changes will be implemented in the future. -
Page 27: General Menu
4.7.1 General menu The “GENERAL ” settings menu provides access to all settings relevant to the installation of the xStorage Home 3P . Figure 13. The structure of the general settings menu page The general settings covers: “DATE / TIME” . The page enables to set the current date and time. -
Page 28: Plant Menu
Figure 14. The structure of the plant menu page Please refer to the xStorage Home 3P installation manual for the electrical connections and wiring. Please note that figure 14 is only an example and it does not represent the current status of the menu. - Page 29 12. “FEED-IN CONTROL”. This page allows to enable / disable the FEED-IN CONTROL mode to limit the injection of the energy produced into the network and to set the limit value. Please refer to the xStorage Home 3P installation manual for further details.
-
Page 30: Home Automation" Menu
Figure 15. The structure of the home automation menu page XSTORAGE HOME 3P USER INTERFACE DISPLAY MANUAL MN700010EN October 2020 www.eaton.com... - Page 31 “SMART LD” . This page enables to set the SMART LOAD operating mode for the load controlled by the isolated change-over contact (4 A – 250 Vac max) available in the xStorage Home 3P . Through contact, it is possible to enable secondary storage systems and / or domestic loads based on the status and energy balance of the system.
-
Page 32: Battery Menu
The “BATTERY” menu enables to configure the type, the brand and the model of the lithium-ion battery among those supported by the xStorage Home 3P system. Also, it allows to perform further settings of the usage parameters. Those settings are only accessible through the “INSTALLER” profile which requires a password to be logged in. -
Page 33: Networking Menu
To ensure optimal Wi-Fi connectivity, make sure that the Wi-Fi signal available near the installation of the xStorage Home 3P system is high enough to allow a stable connection. For this purpose, during the configuration of the network parameters, the scanning and selection of the Wi-Fi network carried out by the xStorage Home 3P reports the signal strength of the wireless network to which the end-user intends to connect. -
Page 34: Grid Code Menu
See the “LOGIN” menu section. WARNING – The settings of the GRID CODE can be accessed only by Eaton certified installers. Changing the parameters using the installer profile and not being an Eaton certified installer can affect the correct functioning of the system and relieves the manufacturer from all liabilities and invalidates the warranty and/or guarantee. -
Page 35: Cei 0-21 Menu
Figure 19. The structure of the CEI 0-21 menu page Contact the Eaton technical support representative for further details. Please note that figure 19 can be subject to changes in the future due to new regulations. XSTORAGE HOME 3P USER INTERFACE DISPLAY MANUAL MN700010EN October 2020 www.eaton.com... -
Page 36: Vde Ar-N 4105 Menu
Figure 20. The structure of the VDE AR-N 4105 menu page Contact the Eaton technical support representative for further details. Please note that figure 20 can be subject to changes in the future due to new regulations. XSTORAGE HOME 3P USER INTERFACE DISPLAY MANUAL MN700010EN October 2020 www.eaton.com... -
Page 37: G98-G99 Menu
Figure 21. The structure of the G98-G99 menu page Contact the Eaton technical support representative for further details. Please note that figure 21 can be subject to changes in the future due to new regulations. XSTORAGE HOME 3P USER INTERFACE DISPLAY MANUAL MN700010EN October 2020 www.eaton.com... -
Page 38: 50549-1 Menu
Figure 22. The structure of the EN 50549-1 menu page Contact the Eaton technical support representative for further details. Please note that figure 22 can be subject to changes in the future due to new regulations. XSTORAGE HOME 3P USER INTERFACE DISPLAY MANUAL MN700010EN October 2020 www.eaton.com... -
Page 39: System Update
STAND-BY mode. Make sure you have connected an external USB memory stick where the “ xStorage Home 3P “ update file has been uploaded. The external USB memory stick must be large enough and must have at least 128 Mb of free space. -
Page 40: Monitoring System
Registered xStorage Home 3P systems send operating data at regular intervals which are collected and organized by the local user interface and the Eaton cloud portal in order to provide system status in a simple and immediate way. - Page 41 To ensure optimal Wi-Fi connectivity, make sure that the Wi-Fi signal available near the installation of the xStorage Home 3P system is high enough to allow a stable connection. For this purpose, during the configuration of the network parameters, the scanning and selection of the Wi-Fi network carried out by the xStorage Home 3P reports the signal strength of the wireless network to which the end-user intends to connect.
-
Page 42: How To Connect To A Wi-Fi Network
Wait for the connection to be established: blue LED (3) on and icon highlighted on the screen (5). The xStorage Home 3P system is now connected to the Wi-Fi network of the selected router. XSTORAGE HOME 3P USER INTERFACE DISPLAY MANUAL MN700010EN October 2020 www.eaton.com... -
Page 43: Wi-Fi/Lan Ip Network Settings
MENU SETTINGS NETWORKING WLAN NETWORK MENU SETTINGS NETWORKING LAN NETWORK Figure 25. The IP network settings available from the display of xStorage Home 3P The next sessions detail how to configure the static or DHCP address. -
Page 44: Static Ip
This functionality can be helpful if there is a need to make direct remote access to the xStorage Home 3P system by using a smartphone / tablet / PC device from a browser and the selected IP address. -
Page 45: Eaton Web Portal Access
Registered xStorage Home 3P systems send operating data at regular intervals which are collected and organized by the local user interface and the Eaton cloud portal in order to provide system status in a simple and immediate way. Web access can be made from the portal https://www.xstoragehome3p.eaton.com 5.3.1... -
Page 46: User Registration
Create a user account through the registration procedure available on the portal page to be able to access the online services. Follow the instructions reported below: Access the Eaton portal via a smartphone / tablet / PC / Laptop by typing the following address on the web browser: https://www.xstoragehome3p.eaton.com Access the registration page and fill in the proposed form. - Page 47 XSTORAGE HOME 3P USER INTERFACE DISPLAY MANUAL MN700010EN October 2020 www.eaton.com...
- Page 48 Photos and pictures also do not warrant a specific layout or functionality. Their use in whatever form is subject to prior approval Eaton by Eaton. The same applies to Trademarks (especially Eaton, Moeller, EMEA Headquarters and Cutler-Hammer). The Terms and Conditions of Eaton apply, as Route de la Longeraie 7 referenced on Eaton Internet pages and Eaton order confirmations.
Need help?
Do you have a question about the xStorage Home 3P and is the answer not in the manual?
Questions and answers