Advertisement
Quick Links
www.garagedoorsonline.co.uk
EN -
PLUG-IN GSM MODULE FOR REMOTE CONTROL OF DOORS
GSM900
:
Plug-in GSM module for remote control of doors, to be installed into TVPRP868x10x control unit.
The device has a built-in GSM-Quad Band module, suitable for communication via SMS or phone-call.
For a correct installation and use of this product, scrupulously respect the indications laid out in this manual.
The product could produce or be subject to interferences that may influence its performance or the functioning
of other devices in the proximity. Read carefully the Safety Information.
1- Product description
PROG led
GSM led
2- Preliminary check
•
SIM card must be active and having credit.
•
PIN code and the answering service MUST be disabled.
•
Do not activate any other additional services, like the incoming calls filter or number masking.
We suggest to try the correct functioning of the SIM by means of a standard mobile phone before starting the
installation of the product.
3- Installation
•
Insert the SIM in the proper slot of GSM900.
•
Install the aerial for the GSM signal reception.
•
Plug the module in the proper connector of TVPRP control unit.
•
Switch the TVPRP on.
•
Wait about 30 seconds for the initial startup and the connection to GSM signal.
Connection led quickly flashes during the GSM signal research, then slower once the connection is ready.
GSM led shows the quality of the connection and possible errors:
GSM led
Quick flash
ON (solid)
4 slow flashes and a pause
3 slow flashes and a pause
2 slow flashes and a pause
1 flash and a pause
4 quick flashes then ON (solid)
Slow flashing
GSM900
PRODUCT:
TELECO AUTOMATION SRL -
++39.0438.388511 FAX: ++39.0438.388536 - www.telecoautomation.com
TELEPHONE:
This document is the property of Teleco Automation Srl who reserves all reproduction and copying rights
Programming button
Terminal
Meaning
Startup of the module (about 30 sec. at the first power-on)
No GSM signal
Excellent GSM signal
Good GSM signal
Sufficient GSM signal
Poor GSM signal
No SIM card
SIM card has the PIN code activated
01926 463888
Via dell'Artigianato, 16 - 31014 Colle Umberto (TV) ITALY
GSM aerial
Connection led
DOC.:
1
08/08/14
T625.01
DATE:
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for TELECO AUTOMATION GSM900
Summary of Contents for TELECO AUTOMATION GSM900
- Page 1 Via dell’Artigianato, 16 - 31014 Colle Umberto (TV) ITALY ++39.0438.388511 FAX: ++39.0438.388536 - www.telecoautomation.com TELEPHONE: This document is the property of Teleco Automation Srl who reserves all reproduction and copying rights EN - PLUG-IN GSM MODULE FOR REMOTE CONTROL OF DOORS GSM900 Plug-in GSM module for remote control of doors, to be installed into TVPRP868x10x control unit.
- Page 2 Press 3 times and hold the programming button down for at least 10 seconds; during this lapse PROG led will flash intermittently and quickly, until it will turn constantly on. At the end release the button. 08/08/14 GSM900 T625.01 PRODUCT: DATE: DOC.:...
- Page 3 Note: All the numbers memorized by means of the command TELx have this function activated by default. DEACTIVATION OF ALARM SMS FOR A SPECIFIC NUMBER DSMSxxxxxxxx The command deactivates the reception of alarm sms. See syntax and notes above. 08/08/14 GSM900 T625.01 PRODUCT: DATE: DOC.:...
- Page 4 After every command sent via SMS, the device make a call and send an SMS as confirmation of the correct reception. This automatic call must be manually stopped, hanging-up. The function is deactivated by default. 20 DEACTIVATION OF FEEDBACK CALL AFTER A SMS DCALL 08/08/14 GSM900 T625.01 PRODUCT: DATE: DOC.:...
-
Page 5: Technical Specification
We inform that GSM900 works using radio frequency and not one telephonic company can guarantee the connection to the device at any moment. For this reason the product cannot be used with personal emergency systems.
Need help?
Do you have a question about the GSM900 and is the answer not in the manual?
Questions and answers