Philips ACT210 Software Manual
Philips act210: software guide
Hide thumbs
Also See for ACT210:
- Specifications (2 pages) ,
- Product manual (36 pages) ,
- Service manual (34 pages)
Advertisement
Quick Links
Download this manual
See also:
Service Manual
PSA 128 MAX, PSA 256 MAX & PSA 256 MAX Jordan Firmware upgrade
procedure
For
Windows users
1. Download the zip file from the site. Then unzip the file into a temp folder on your
computer.
2. At Start->Programs->Nike->psa128max or psa256max or psa256maxJordan, select
and launch "Upgrader".
3. When the user starts the Upgrader with no device connected, the following screen
Start
is seen with the
• The
Start
button is enabled only when the correct device is connected
• Click on the"..." button to browse and select the unzipped firmware file to be
loaded into the device and then click open
o For psa128max, please select the file psa128max_ACT211_Western.ebn
or psa128max_ACT211_Asian.ebn(With Asian fonts)
o For psa256max, please select the file psa256max_ACT215_Western.ebn
or psa256max_ACT215_Asian.ebn(With Asian fonts)
o For psa256max Jordan, please select the file
psa256maxJordan_ACT216.ebn.
button disabled.
Advertisement
Related Manuals for Philips ACT210
Summary of Contents for Philips ACT210
- Page 1 procedure Windows users 1. Download the zip file from the site. Then unzip the file into a temp folder on your computer. 2. At Start->Programs->Nike->psa128max or psa256max or psa256maxJordan, select and launch “Upgrader”. 3. When the user starts the Upgrader with no device connected, the following screen Start is seen with the button disabled.
- Page 2 - Place a fresh battery to the set and connected to the PC • The user is informed that the device will be upgraded with the new firmware. On pressing OK, the firmware is loaded. • Disconnect the device so that the device upgrades to the new firmware -Press the play key and the LCD display shows :”...
- Page 3 Mac users 1. Download the sit file from the site. Then unzip the file into a temp folder on your computer. 2. Go to Applications folder on your MAC Machine and double click Upgrader or Formatter. Fig (1) 3. In steps below, ASSUMPTION made is that you have Formatter and Upgrader already installed on your MAC.
- Page 4 installers. E.g. : ACT 211 installer is Installer_psa128max, ACT215 installer is Installer_psa256max and ACT 216 installer is Installer_pas256maxJordan. Fig(2) Fig(3) (b) Once the installer is run, the Upgrader and Formatter is copied to MAC HDD:Applications folder :psaXXXmax folder. (see Fig (1)) 4.
- Page 5 5. The Start button is enabled only when the correct device is connected. 6. Click on the 'Choose File' button to browse and select the unzipped firmware file to be loaded into the device and then click Open. For psa128max select the file psa128max_ACT211_Western.ebn or psa128max_ACT211_Asian.ebn (With Asian fonts) For psa256max,select the file psa256max_ACT215_Western.ebn or psa256max_ACT215_Asian.ebn(With Asian fonts)
- Page 6 7. The user is informed that the device will be upgraded with the new firmware. On pressing OK, the firmware is loaded. 8. After the firmware has been load the user is prompted to disconnect and restart the device.
- Page 7 9. Disconnect the device so that the device upgrades to the new firmware.