Functional Overview; Front Panel; Rear Panel - Philips HTS3306 User Manual

Philips hts3306: user guide
Hide thumbs Also See for HTS3306:
Table of Contents

Advertisement

3.

FUNCTIONAL OVERVIEW

3.1. Front Panel

1
2
3* 4
* The unit can also be turned on by pressing these
buttons.
1.
(standby/on) button
• Press to turn on the unit, or to switch the unit into
standby mode. (To completely turn off the unit, you
must unplug the AC power cord.)
• Press and hold for 10 seconds to shut down the unit.
2. Disc tray
• Place a disc after opening the disc tray.
3.
(open/close) button*
• Press to open or close the disc tray.
4.
/
(previous/next) buttons
• Press to skip to the previous or next title / chapter /
track / file.
5.
(stop) button
• Press to stop playback.
6.
(play) button*
• Press to start or resume playback.
7. SOURCE button
• Press to switch the active source mode.
8. Infrared sensor window
• Receives signals from your remote control so that
you can control the unit from a distance.
9. Display
• Refer to "Display Panel" on page 15.
10. VOLUME jog
• Rotate to adjust the volume.
11. MP3 LINK jack
• Use to connect your portable audio player with
3.5mm stereo audio cable.
12. SD CARD slot
• Insert an SD card and play back the contents in it.
EN - 12
5 6* 7 8
9
10
12
11

3.2. Rear Panel

1
2
SPEAKERS 4
SUB-
FRONT
REAR
FRONT
WOOFER
CENTER
1. AC power cord
• Connect to a standard AC outlet to supply power to
this unit.
• Unplug this cord from the AC outlet to completely
turn off the unit.
2. 5.1ch Audio Out jacks (SPEAKERS (4 ))
• Use to connect supplied 5.1ch speakers.
3. LAN terminal
• Use to connect to network provisioning equipment
such as a router or a modem with a LAN cable.
4. HDMI OUT jack
• Use to connect to a display with an HDMI compatible
port with an HDMI cable.
5. AUDIO IN (AUX) jacks
• Use to connect to another device with audio out
jacks with an audio cable.
6. DIGITAL AUDIO IN (COAXIAL) jack
• Use to connect to another device with a digital audio
coaxial output jack with a digital audio coaxial cable.
7. VIDEO OUT jack
• Use to connect a TV monitor, an AV receiver /
amplifier or other device with a video cable.
C Caution
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
This unit does not have an RF modulator.
3
4
5
6
LAN
HDMI OUT
DIGITAL
AUDIO IN
AUDIO IN
AUX
COAXIAL
VIDEO OUT
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hts3306/f7Hts3306/f8

Table of Contents